Date 6/2/2003
Project:  TRXRDN030602

X-band receiver in Equipment Room for baseline investigation.

Initial scans 2-11 with IF Rack noise source for system health
check. Used ~rnorrod/Gbt/TestCfgs/if_acs_odd.cfg to setup.

2 : SCAN STARTING AT 52792 18:56:00
11 : SCAN FINISHED AT 52792 19:08:04

Now, connected X-band rx IF L into OR 1 and R into OR3.  Connection
map is now:

ACSBank & Sampler & SF & CM & OR \\
\hline
1 & 0 & 1 & 1 & 1 & XL \\
1 & 1 & 5 & 5 & 3 & XR \\
2 & 2 & 2 & 2 & 2 & NS \\
2 & 3 & 6 & 6 & 4 & NS \\
3 & 4 & 3 & 11 & 5 & NS \\
3 & 5 & 7 & 12 & 7 & NS \\
4 & 6 & 4 & 15 & 5 & NS \\
4 & 7 & 8 & 16 & 7 & NS \\


LO1 = 11.4GHz (Fsky=8.4GHz)
Receiver is not yet cold; T15 = ~115, T50=~70

12 : SCAN STARTING AT 52792 19:30:18

Found Cal not firing in L channel due to MCB setup error.  Corrected
during scan 28.

39 : SCAN FINISHED AT 52792 20:04:17

Changed scan time to 300s.
T15K = 106K; T50K = 48K

40 : SCAN STARTING AT 52792 20:05:47
41 : SCAN FINISHED AT 52792 20:16:07

Changed LO1=12.0GHz (Fsky=9.0GHz)

42 : SCAN STARTING AT 52792 20:17:47
43 : SCAN FINISHED AT 52792 20:28:07

Changed LO1=12.6GHz (Fsky=9.6GHz)

44 : SCAN STARTING AT 52792 20:30:24
45 : SCAN FINISHED AT 52792 20:40:44

Changed LO1=12.0GHz (Fsky=9.0GHz)
Also disabled Tcal.
46 : SCAN STARTING AT 52792 20:48:11
47 : SCAN FINISHED AT 52792 20:58:31

Turned Tcal ON all the time

48 : SCAN STARTING AT 52792 21:00:58
49 : SCAN FINISHED AT 52792 21:11:18

Turned High Tcal ON all the time.

50 : SCAN STARTING AT 52792 21:13:30
51 : SCAN FINISHED AT 52792 21:23:50

Quit for the evening.