####################################################### SCRIPT NUMBER 1, project:TGBT21A_501_11 252155 1030 Sudipta Paul 13 Tyler Hise 2021-02-10 07:03:40 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 11.72 nchan = 32768 swmode = 'tp_nocal' swtype = 'none' swper = 1 tint = 0.1 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('PSR_B0329+54') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeak() # Slew('PSR_B0329+54') Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): Track("PSR_B0329+54", None, 300) ####################################################### LOG SESSION NUMBER 1 [07:03:40] ******** Begin Scheduling Block [07:03:40] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501, date = 10 Feb 2021 [07:03:41] Configuring telescope. [07:03:41] ERROR: This receiver only has one feed: the metakeyword 'beam' must be set to 'B1' or '1' [07:03:41] "ERROR: This receiver only has one feed: the metakeyword 'beam' must be set to 'B1' or '1'" [07:03:41] Default values are [07:03:41] dfreq = [0, 0, 0, 0, 0] [07:03:41] notchfilter = In [07:03:41] polswitch = thru [07:03:41] Please fix configuration, then try again [07:03:41] *** Configuration failed! [07:03:41]  [07:03:41] User queried: "Configuration failed! Terminate block?" waiting for reply... [07:03:51] User replied: "Yes". [07:03:51] Exiting scheduling block. runSuccessful: False [07:03:51] ******** End Scheduling Block [07:03:51] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501 how much log? 926 id: 252155self.history: self.history.connection: how much converted log? 1141 ####################################################### ####################################################### SCRIPT NUMBER 2, project:TGBT21A_501_11 252156 1030 Sudipta Paul 13 Tyler Hise 2021-02-10 07:05:03 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' beam = 1 restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 11.72 nchan = 32768 swmode = 'tp_nocal' swtype = 'none' swper = 1 tint = 0.1 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('PSR_B0329+54') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeak() # Slew('PSR_B0329+54') Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): Track("PSR_B0329+54", None, 300) ####################################################### LOG SESSION NUMBER 2 [07:05:03] ******** Begin Scheduling Block [07:05:03] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501, date = 10 Feb 2021 [07:05:03] Configuring telescope. [07:05:03] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [07:05:03] ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [07:05:03] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [07:05:03] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [07:05:03] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [07:05:03] "ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [07:05:03] Default values are [07:05:03] dfreq = [0, 0, 0, 0, 0] [07:05:03] if3freq = [0, 0, 0, 0, 0] [07:05:03] Please fix configuration, then try again [07:05:03] *** Configuration failed! [07:05:03]  [07:05:03] User queried: "Configuration failed! Terminate block?" waiting for reply... [07:05:08] User replied: "No". [07:05:08] source : PSR_B0329+54 VELDEF : VRAD-LSR location : J2000 @ (03:32:59.34, 54:34:45.04) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [07:05:08] Slewing to source. [07:05:09] In state Ready, waiting for state Activating [07:05:09] Setting State: Activating [07:05:09] Detected state Activating [07:05:09] In state Activating, waiting for state Ready [07:05:13] Setting State: Aborting [07:05:13] ygor.Telescope: WaitForReady: Asking abort confirmation. [07:05:13]  [07:05:13] User queried: "Abort detected! Terminate block?" waiting for reply... [07:05:14] User replied: "Yes". [07:05:14] Exiting scheduling block. [07:05:14] Setting State: Ready runSuccessful: False [07:05:14] ******** End Scheduling Block [07:05:14] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501 how much log? 2571 id: 252156self.history: self.history.connection: how much converted log? 2779 ####################################################### ####################################################### SCRIPT NUMBER 3, project:TGBT21A_501_11 252157 1030 Sudipta Paul 13 Tyler Hise 2021-02-10 07:05:29 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' beam = '1' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 11.72 nchan = 32768 swmode = 'tp_nocal' swtype = 'none' swper = 1 tint = 0.1 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('PSR_B0329+54') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeak() # Slew('PSR_B0329+54') Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): Track("PSR_B0329+54", None, 300) ####################################################### LOG SESSION NUMBER 3 [07:05:30] ******** Begin Scheduling Block [07:05:30] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501, date = 10 Feb 2021 [07:05:30] Configuring telescope. [07:05:30] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [07:05:30] ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [07:05:30] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [07:05:30] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [07:05:30] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [07:05:30] "ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [07:05:30] Default values are [07:05:30] dfreq = [0, 0, 0, 0, 0] [07:05:30] if3freq = [0, 0, 0, 0, 0] [07:05:30] Please fix configuration, then try again [07:05:30] *** Configuration failed! [07:05:30]  [07:05:30] User queried: "Configuration failed! Terminate block?" waiting for reply... [07:05:32] User replied: "Yes". [07:05:32] Exiting scheduling block. runSuccessful: False [07:05:32] ******** End Scheduling Block [07:05:32] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501 how much log? 1847 id: 252157self.history: self.history.connection: how much converted log? 2055 ####################################################### ####################################################### SCRIPT NUMBER 4, project:TGBT21A_501_11 252158 1030 Sudipta Paul 13 Tyler Hise 2021-02-10 07:08:34 obs_completed ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 23.44 nchan = 32768 swmode = 'tp_nocal' swtype = 'none' swper = 1 tint = 0.1 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('PSR_B0329+54') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeak() # Slew('PSR_B0329+54') Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): Track("PSR_B0329+54", None, 300) ####################################################### LOG SESSION NUMBER 4 [07:08:34] ******** Begin Scheduling Block [07:08:34] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501, date = 10 Feb 2021 [07:08:34] Configuring telescope. [07:08:34] Setting State: Activating [07:08:37] Setting State: Ready [07:08:38] Setting State: Activating [07:08:39] Setting State: Ready [07:08:39] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [07:08:39] Default values are [07:08:39] dfreq = [0, 0, 0, 0, 0] [07:08:39] if3freq = [0, 0, 0, 0, 0] [07:08:39] notchfilter = In [07:08:39] polswitch = thru [07:08:39] Configuring for backend VEGAS... [07:08:39] The bad devices are: [07:08:39] ConverterFilter14 [07:08:39] ConverterFilter2 [07:08:39] ConverterFilter16 [07:08:39] ConverterFilter10 [07:08:39] ConverterFilter12 [07:08:39] The bad devices are: [07:08:39] ConverterFilter14 [07:08:39] ConverterFilter2 [07:08:39] ConverterFilter16 [07:08:39] ConverterFilter10 [07:08:39] ConverterFilter12 [07:08:39] Waiting for IFRack to finish activating [07:08:39] . . . [07:08:39] Finalizing VEGAS config... [07:08:39] Checking telescope [07:08:39] Configuration Complete [07:08:39] source : PSR_B0329+54 VELDEF : VRAD-LSR location : J2000 @ (03:32:59.34, 54:34:45.04) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [07:08:39] Slewing to source. [07:08:40] In state Ready, waiting for state Activating [07:08:40] Setting State: Activating [07:08:40] Detected state Activating [07:08:40] In state Activating, waiting for state Ready [07:09:58] Setting State: Ready [07:09:58] Detected state Ready [07:09:58] Configuring telescope. [07:09:58] Setting State: Activating [07:10:01] Setting State: Ready [07:10:01] Setting State: Activating [07:10:02] Setting State: Ready [07:10:02] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [07:10:02] Default values are [07:10:02] dfreq = [0, 0, 0, 0, 0] [07:10:02] if3freq = [0, 0, 0, 0, 0] [07:10:02] notchfilter = In [07:10:02] polswitch = thru [07:10:02] Configuring for backend VEGAS... [07:10:02] The bad devices are: [07:10:02] ConverterFilter14 [07:10:02] ConverterFilter2 [07:10:02] ConverterFilter16 [07:10:02] ConverterFilter10 [07:10:02] ConverterFilter12 [07:10:02] The bad devices are: [07:10:02] ConverterFilter14 [07:10:02] ConverterFilter2 [07:10:02] ConverterFilter16 [07:10:02] ConverterFilter10 [07:10:02] ConverterFilter12 [07:10:02] Waiting for IFRack to finish activating [07:10:02] . . [07:10:02] Finalizing VEGAS config... [07:10:02] Checking telescope [07:10:02] Configuration Complete [07:10:02] Balancing IF system. [07:10:02] Balancing IFRack [07:10:03] Setting State: Activating [07:10:05] the sampler values are: [07:10:05] RF_power 1 : 6.064453 [07:10:05] RF_power 2 : 0.1708984 [07:10:05] RF_power 3 : 2.001953 [07:10:05] RF_power 4 : 0.1416016 [07:10:05] RF_power 5 : 0.390625 [07:10:05] RF_power 6 : 0.546875 [07:10:05] RF_power 7 : 0.3808594 [07:10:05] RF_power 8 : 0.7568359 [07:10:05] Balancing VEGAS [07:10:05] Setting State: Ready [07:10:07] Setting State: Activating [07:10:07] Setting State: Ready [07:10:09] Setting State: Activating [07:10:09] Setting State: Ready [07:10:11] Setting State: Activating [07:10:11] Setting State: Ready [07:10:12] Configuring telescope. [07:10:12] Setting State: Activating [07:10:16] Setting State: Ready [07:10:17] Setting State: Activating [07:10:18] Setting State: Ready [07:10:18] Default values are [07:10:18] if3freq = [0] [07:10:18] notchfilter = In [07:10:18] polswitch = thru [07:10:18] Configuring for backend DCR... [07:10:18] The bad devices are: [07:10:18] ConverterFilter14 [07:10:18] ConverterFilter2 [07:10:18] ConverterFilter16 [07:10:18] ConverterFilter10 [07:10:18] ConverterFilter12 [07:10:18] Waiting for IFRack to finish activating [07:10:18] . . Waiting for Rcvr1_2 to finish activating [07:10:18] . . [07:10:18] Checking telescope [07:10:18] Configuration Complete [07:10:18] Balancing IF system. [07:10:18] Balancing IFRack [07:10:19] Setting State: Activating [07:10:20] the sampler values are: [07:10:20] RF_power 1 : 0.5126953 [07:10:20] RF_power 2 : 0.1757812 [07:10:20] RF_power 3 : 0.4541016 [07:10:20] RF_power 4 : 0.1416016 [07:10:20] RF_power 5 : 0.3955078 [07:10:20] RF_power 6 : 0.546875 [07:10:20] RF_power 7 : 0.3759766 [07:10:20] RF_power 8 : 0.7519531 [07:10:20] Searching for calibrator with at least 0.50 Jy at 1400 MHz within 10.0 degrees of [03:32:59.33, 54:34:45.06] (J2000). [07:10:20] Estimated slew time to 0337+5045 is 0.11 minutes [07:10:20] Calibrator 0337+5045 at 1400.00 MHz emitting 3.34 Jy, 3.9 degrees away at [03:37:43.41, 50:45:52.50] (J2000). [07:10:20] source : 0337+5045 [07:10:20] Slewing to source. [07:10:21] In state Activating, waiting for state Activating [07:10:21] Detected state Activating [07:10:21] In state Activating, waiting for state Ready [07:10:45] Setting State: Ready [07:10:45] Detected state Ready [07:10:45] Balancing IF system. [07:10:45] Balancing IFRack [07:10:46] Setting State: Activating [07:10:46] Setting State: Ready [07:10:48] the sampler values are: [07:10:48] RF_power 1 : 1.09375 [07:10:48] RF_power 2 : 0.1806641 [07:10:48] RF_power 3 : 0.9814453 [07:10:48] RF_power 4 : 0.1416016 [07:10:48] RF_power 5 : 0.4052734 [07:10:48] RF_power 6 : 0.5615234 [07:10:48] RF_power 7 : 0.3955078 [07:10:48] RF_power 8 : 0.78125 [07:10:48] Peak: Subscan 1 of 4 [07:10:51] In state Ready, waiting for state Running [07:10:51] Setting State: Activating [07:11:09] Setting State: Committed [07:11:11] Setting State: Running [07:11:11] Detected state Running [07:11:11] *** Notice: This subscan will be numbered as scan #140 in your data reduction package. [07:11:11] In state Running, waiting for state Ready [07:11:41] Setting State: Stopping [07:11:46] Setting State: Ready [07:11:46] Detected state Ready [07:11:46] Ygor Telescope: WaitForStopping [07:11:46] Peak: Subscan 2 of 4 [07:11:46] In state Ready, waiting for state Running [07:11:46] Setting State: Activating [07:11:54] Setting State: Committed [07:11:56] Setting State: Running [07:11:56] Detected state Running [07:11:56] *** Notice: This subscan will be numbered as scan #141 in your data reduction package. [07:11:56] In state Running, waiting for state Ready [07:12:26] Setting State: Stopping [07:12:31] Setting State: Ready [07:12:31] Detected state Ready [07:12:31] Ygor Telescope: WaitForStopping [07:12:31] *** Updating antenna's pointing to az2=0.1396 and el=0.0000 arcmins [07:12:31] Peak: Subscan 3 of 4 [07:12:32] In state Ready, waiting for state Running [07:12:32] Setting State: Activating [07:12:50] Setting State: Committed [07:12:52] Setting State: Running [07:12:52] Detected state Running [07:12:52] *** Notice: This subscan will be numbered as scan #142 in your data reduction package. [07:12:52] In state Running, waiting for state Ready [07:13:22] Setting State: Stopping [07:13:26] Setting State: Ready [07:13:26] Detected state Ready [07:13:26] Ygor Telescope: WaitForStopping [07:13:26] Peak: Subscan 4 of 4 [07:13:27] In state Ready, waiting for state Running [07:13:27] Setting State: Activating [07:13:35] Setting State: Committed [07:13:37] Setting State: Running [07:13:37] Detected state Running [07:13:37] *** Notice: This subscan will be numbered as scan #143 in your data reduction package. [07:13:37] In state Running, waiting for state Ready [07:14:07] Setting State: Stopping [07:14:12] Setting State: Ready [07:14:12] Detected state Ready [07:14:12] Ygor Telescope: WaitForStopping [07:14:12] *** Updating antenna's pointing to az2=0.1396 and el=0.1341 arcmins [07:14:13] source : PSR_B0329+54 VELDEF : VRAD-LSR location : J2000 @ (03:32:59.34, 54:34:45.04) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [07:14:13] Slewing to source. [07:14:13] In state Ready, waiting for state Activating [07:14:13] Setting State: Activating [07:14:13] Detected state Activating [07:14:13] In state Activating, waiting for state Ready [07:14:38] Setting State: Ready [07:14:38] Detected state Ready [07:14:38] Configuring telescope. [07:14:38] Setting State: Activating [07:14:41] Setting State: Ready [07:14:42] Setting State: Activating [07:14:43] Setting State: Ready [07:14:43] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [07:14:43] Default values are [07:14:43] if3freq = [0, 0, 0, 0, 0] [07:14:43] notchfilter = In [07:14:43] polswitch = thru [07:14:43] Configuring for backend VEGAS... [07:14:43] The bad devices are: [07:14:43] ConverterFilter14 [07:14:43] ConverterFilter2 [07:14:43] ConverterFilter16 [07:14:43] ConverterFilter10 [07:14:43] ConverterFilter12 [07:14:43] The bad devices are: [07:14:43] ConverterFilter14 [07:14:43] ConverterFilter2 [07:14:43] ConverterFilter16 [07:14:43] ConverterFilter10 [07:14:43] ConverterFilter12 [07:14:43] Waiting for IFRack to finish activating [07:14:43] . . . [07:14:43] Finalizing VEGAS config... [07:14:43] Checking telescope [07:14:43] Configuration Complete [07:14:43] Balancing IF system. [07:14:43] Balancing IFRack [07:14:44] Setting State: Activating [07:14:45] the sampler values are: [07:14:45] RF_power 1 : 5.65918 [07:14:45] RF_power 2 : 0.1708984 [07:14:45] RF_power 3 : 2.700195 [07:14:45] RF_power 4 : 0.1416016 [07:14:45] RF_power 5 : 0.390625 [07:14:45] RF_power 6 : 0.546875 [07:14:45] RF_power 7 : 0.3808594 [07:14:45] RF_power 8 : 0.7617188 [07:14:45] Balancing VEGAS [07:14:46] Setting State: Ready [07:14:47] Setting State: Activating [07:14:47] Setting State: Ready [07:14:47] source : PSR_B0329+54 VELDEF : VRAD-LSR location : J2000 @ (03:32:59.34, 54:34:45.04) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [07:14:48] Track: Subscan 1 of 1 [07:14:48] In state Ready, waiting for state Running [07:14:48] Setting State: Activating [07:14:49] Setting State: Committed [07:15:14] Setting State: Running [07:15:14] Detected state Running [07:15:14] *** Notice: This subscan will be numbered as scan #144 in your data reduction package. [07:15:14] In state Running, waiting for state Ready [07:20:16] Setting State: Stopping [07:20:18] Setting State: Ready [07:20:18] Detected state Ready [07:20:18] Ygor Telescope: WaitForStopping runSuccessful: True [07:20:18] ******** End Scheduling Block [07:20:18] ******** observer = Sudipta Paul, SB name = G1_PSR, project ID = TGBT21A_501 how much log? 11132 id: 252158self.history: self.history.connection: how much converted log? 11339 ####################################################### ####################################################### SCRIPT NUMBER 5, project:TGBT21A_501_11 252159 1021 Michael Fanelli 13 Tyler Hise 2021-02-10 07:25:11 obs_aborted ####################################################### # observing script for NGC 2415 # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 11.72 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 2 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('NGC2415') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): OnOff('NGC2415', Offset('J2000', 0.4042,0.263), 300) ####################################################### LOG SESSION NUMBER 5 [07:25:11] ******** Begin Scheduling Block [07:25:11] ******** observer = Michael Fanelli, SB name = 1_Mike_day2, project ID = TGBT21A_501, date = 10 Feb 2021 [07:25:12] Configuring telescope. [07:25:12] ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [07:25:12] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [07:25:12] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [07:25:12] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [07:25:12] "ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [07:25:12] Default values are [07:25:12] if3freq = [0, 0, 0, 0, 0] [07:25:12] Please fix configuration, then try again [07:25:12] *** Configuration failed! [07:25:12]  [07:25:12] User queried: "Configuration failed! Terminate block?" waiting for reply... [07:25:23] User replied: "Yes". [07:25:23] Exiting scheduling block. runSuccessful: False [07:25:23] ******** End Scheduling Block [07:25:23] ******** observer = Michael Fanelli, SB name = 1_Mike_day2, project ID = TGBT21A_501 how much log? 1638 id: 252159self.history: self.history.connection: how much converted log? 1846 ####################################################### ####################################################### SCRIPT NUMBER 6, project:TGBT21A_501_11 252160 1021 Michael Fanelli 13 Tyler Hise 2021-02-10 07:26:24 obs_completed ####################################################### # observing script for NGC 2415 # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 2 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('NGC2415') # observation sequence of calibrators Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=1 for i in range(numobs): OnOff('NGC2415', Offset('J2000', 0.4042,0.263), 300) ####################################################### LOG SESSION NUMBER 6 [07:26:24] ******** Begin Scheduling Block [07:26:24] ******** observer = Michael Fanelli, SB name = 1_Mike_day2, project ID = TGBT21A_501, date = 10 Feb 2021 [07:26:24] Configuring telescope. [07:26:24] Setting State: Activating [07:26:28] Setting State: Ready [07:26:28] Setting State: Activating [07:26:29] Setting State: Ready [07:26:29] Default values are [07:26:29] if3freq = [0, 0, 0, 0, 0] [07:26:29] notchfilter = In [07:26:29] polswitch = thru [07:26:29] Configuring for backend VEGAS... [07:26:29] The bad devices are: [07:26:29] ConverterFilter14 [07:26:29] ConverterFilter2 [07:26:29] ConverterFilter16 [07:26:29] ConverterFilter10 [07:26:29] ConverterFilter12 [07:26:29] The bad devices are: [07:26:29] ConverterFilter14 [07:26:29] ConverterFilter2 [07:26:29] ConverterFilter16 [07:26:29] ConverterFilter10 [07:26:29] ConverterFilter12 [07:26:29] Waiting for IFRack to finish activating [07:26:29] . . . [07:26:29] Finalizing VEGAS config... [07:26:29] Checking telescope [07:26:29] Configuration Complete [07:26:30] source : NGC2415 VELDEF : VOPT-HEL location : J2000 @ (07:36:57.00, 35:14:31.00) velocitydefinition : Optical VEL : 3784.0 restframe : Heliocentric [07:26:30] Slewing to source. [07:26:30] In state Ready, waiting for state Activating [07:26:30] Setting State: Activating [07:26:30] Detected state Activating [07:26:30] In state Activating, waiting for state Ready [07:28:14] Setting State: Ready [07:28:14] Detected state Ready [07:28:14] Configuring telescope. [07:28:14] Setting State: Activating [07:28:18] Setting State: Ready [07:28:19] Setting State: Activating [07:28:20] Setting State: Ready [07:28:20] Default values are [07:28:20] if3freq = [0, 0, 0, 0, 0] [07:28:20] notchfilter = In [07:28:20] polswitch = thru [07:28:20] Configuring for backend VEGAS... [07:28:20] The bad devices are: [07:28:20] ConverterFilter14 [07:28:20] ConverterFilter2 [07:28:20] ConverterFilter16 [07:28:20] ConverterFilter10 [07:28:20] ConverterFilter12 [07:28:20] The bad devices are: [07:28:20] ConverterFilter14 [07:28:20] ConverterFilter2 [07:28:20] ConverterFilter16 [07:28:20] ConverterFilter10 [07:28:20] ConverterFilter12 [07:28:20] Waiting for IFRack to finish activating [07:28:20] . . Waiting for Rcvr1_2 to finish activating [07:28:20] . . [07:28:20] Finalizing VEGAS config... [07:28:20] Checking telescope [07:28:20] Configuration Complete [07:28:20] Balancing IF system. [07:28:21] Balancing IFRack [07:28:21] Setting State: Activating [07:28:23] the sampler values are: Setting State: Ready [07:28:23] RF_power 1 : 2.69043 [07:28:23] RF_power 2 : 0.1416016 [07:28:23] RF_power 3 : 2.739258 [07:28:23] RF_power 4 : 0.1171875 [07:28:23] RF_power 5 : 0.3173828 [07:28:23] RF_power 6 : 0.4296875 [07:28:23] RF_power 7 : 0.3027344 [07:28:23] RF_power 8 : 0.6201172 [07:28:23] Balancing VEGAS [07:28:23] Setting State: Activating [07:28:23] Setting State: Ready [07:28:24] Setting State: Activating [07:28:24] Setting State: Ready [07:28:25] Configuring telescope. [07:28:25] Setting State: Activating [07:28:28] Setting State: Ready [07:28:28] Setting State: Activating [07:28:29] Setting State: Ready [07:28:29] Default values are [07:28:29] if3freq = [0] [07:28:29] notchfilter = In [07:28:29] polswitch = thru [07:28:29] Configuring for backend DCR... [07:28:29] The bad devices are: [07:28:29] ConverterFilter14 [07:28:29] ConverterFilter2 [07:28:29] ConverterFilter16 [07:28:29] ConverterFilter10 [07:28:29] ConverterFilter12 [07:28:29] Waiting for IFRack to finish activating [07:28:29] . . [07:28:29] Checking telescope [07:28:29] Configuration Complete [07:28:29] Balancing IF system. [07:28:29] Balancing IFRack [07:28:31] Setting State: Activating [07:28:31] the sampler values are: [07:28:31] RF_power 1 : 0.4345703 [07:28:31] RF_power 2 : 0.1416016 [07:28:31] RF_power 3 : 1.05957 [07:28:31] RF_power 4 : 0.1220703 [07:28:31] RF_power 5 : 0.3173828 [07:28:31] RF_power 6 : 0.4345703 [07:28:31] RF_power 7 : 0.3076172 [07:28:31] RF_power 8 : 0.6201172 [07:28:32] Searching for calibrator with at least 0.50 Jy at 1400 MHz within 10.0 degrees of [07:36:57.00, 35:14:31.06] (J2000). [07:28:32] Estimated slew time to 0741+3112 is 0.16 minutes [07:28:32] Calibrator 0741+3112 (gold standard source) at 1400.00 MHz emitting 2.28 Jy, 4.1 degrees away at [07:41:10.70, 31:12:00.23] (J2000). [07:28:32] source : 0741+3112 [07:28:32] Slewing to source. [07:28:32] In state Activating, waiting for state Activating [07:28:32] Detected state Activating [07:28:32] In state Activating, waiting for state Ready [07:29:03] Setting State: Ready [07:29:03] Detected state Ready [07:29:03] Balancing IF system. [07:29:03] Balancing IFRack [07:29:04] Setting State: Activating [07:29:04] Setting State: Ready [07:29:05] the sampler values are: [07:29:05] RF_power 1 : 0.8300781 [07:29:05] RF_power 2 : 0.1367188 [07:29:05] RF_power 3 : 1.054688 [07:29:05] RF_power 4 : 0.1171875 [07:29:05] RF_power 5 : 0.3173828 [07:29:05] RF_power 6 : 0.4296875 [07:29:05] RF_power 7 : 0.3076172 [07:29:05] RF_power 8 : 0.625 [07:29:06] Peak: Subscan 1 of 4 [07:29:06] In state Ready, waiting for state Running [07:29:06] Setting State: Activating [07:29:27] Setting State: Committed [07:29:29] Setting State: Running [07:29:29] Detected state Running [07:29:29] *** Notice: This subscan will be numbered as scan #145 in your data reduction package. [07:29:29] In state Running, waiting for state Ready [07:29:59] Setting State: Stopping [07:30:05] Setting State: Ready [07:30:05] Detected state Ready [07:30:05] Ygor Telescope: WaitForStopping [07:30:05] Peak: Subscan 2 of 4 [07:30:05] In state Ready, waiting for state Running [07:30:05] Setting State: Activating [07:30:14] Setting State: Committed [07:30:16] Setting State: Running [07:30:16] Detected state Running [07:30:16] *** Notice: This subscan will be numbered as scan #146 in your data reduction package. [07:30:16] In state Running, waiting for state Ready [07:30:46] Setting State: Stopping [07:30:51] Setting State: Ready [07:30:51] Detected state Ready [07:30:51] Ygor Telescope: WaitForStopping [07:30:52] *** Updating antenna's pointing to az2=0.1325 and el=0.1341 arcmins [07:30:52] Peak: Subscan 3 of 4 [07:30:52] In state Ready, waiting for state Running [07:30:52] Setting State: Activating [07:31:11] Setting State: Committed [07:31:13] Setting State: Running [07:31:13] Detected state Running [07:31:13] *** Notice: This subscan will be numbered as scan #147 in your data reduction package. [07:31:13] In state Running, waiting for state Ready [07:31:43] Setting State: Stopping [07:31:48] Setting State: Ready [07:31:48] Detected state Ready [07:31:48] Ygor Telescope: WaitForStopping [07:31:48] Peak: Subscan 4 of 4 [07:31:48] In state Ready, waiting for state Running [07:31:48] Setting State: Activating [07:31:56] Setting State: Committed [07:31:58] Setting State: Running [07:31:58] Detected state Running [07:31:58] *** Notice: This subscan will be numbered as scan #148 in your data reduction package. [07:31:58] In state Running, waiting for state Ready [07:32:28] Setting State: Stopping [07:32:33] Setting State: Ready [07:32:33] Detected state Ready [07:32:33] Ygor Telescope: WaitForStopping [07:32:33] *** Updating antenna's pointing to az2=0.1325 and el=0.4476 arcmins [07:32:33] Focus: Subscan 1 of 1 [07:32:34] In state Ready, waiting for state Running [07:32:34] Setting State: Activating [07:33:00] Setting State: Committed [07:33:02] Setting State: Running [07:33:02] Detected state Running [07:33:02] *** Notice: This subscan will be numbered as scan #149 in your data reduction package. [07:33:02] In state Running, waiting for state Ready [07:34:02] Setting State: Stopping [07:34:04] Setting State: Ready [07:34:04] Detected state Ready [07:34:04] Ygor Telescope: WaitForStopping [07:34:04] *** Updating antenna's focus to -21.95 mm [07:34:05] source : 3C196 F1 : 0.05 F2 : 50.0 S22235 : 0.75 S1400 : 14.43 angsize : 7.0 location : J2000 @ (08:13:36.05, 48:13:02.26) [07:34:05] OnOff: Subscan 1 of 2 [07:34:05] In state Ready, waiting for state Running [07:34:05] Setting State: Activating [07:35:07] Setting State: Committed [07:35:09] Setting State: Running [07:35:09] Detected state Running [07:35:09] *** Notice: This subscan will be numbered as scan #150 in your data reduction package. [07:35:09] In state Running, waiting for state Ready [07:36:09] Setting State: Stopping [07:36:11] Setting State: Ready [07:36:11] Detected state Ready [07:36:11] Ygor Telescope: WaitForStopping [07:36:11] OnOff: Subscan 2 of 2 [07:36:11] In state Ready, waiting for state Running [07:36:11] Setting State: Activating [07:36:28] Setting State: Committed [07:36:30] Setting State: Running [07:36:30] Detected state Running [07:36:30] *** Notice: This subscan will be numbered as scan #151 in your data reduction package. [07:36:30] In state Running, waiting for state Ready [07:37:30] Setting State: Stopping [07:37:32] Setting State: Ready [07:37:32] Detected state Ready [07:37:32] Ygor Telescope: WaitForStopping [07:37:32] Configuring telescope. [07:37:32] Setting State: Activating [07:37:35] Setting State: Ready [07:37:35] Setting State: Activating [07:37:36] Setting State: Ready [07:37:36] Default values are [07:37:36] if3freq = [0, 0, 0, 0, 0] [07:37:36] notchfilter = In [07:37:36] polswitch = thru [07:37:36] Configuring for backend VEGAS... [07:37:36] The bad devices are: [07:37:36] ConverterFilter14 [07:37:36] ConverterFilter2 [07:37:36] ConverterFilter16 [07:37:36] ConverterFilter10 [07:37:36] ConverterFilter12 [07:37:36] The bad devices are: [07:37:36] ConverterFilter14 [07:37:36] ConverterFilter2 [07:37:36] ConverterFilter16 [07:37:36] ConverterFilter10 [07:37:36] ConverterFilter12 [07:37:36] Waiting for IFRack to finish activating [07:37:36] . . [07:37:36] Finalizing VEGAS config... [07:37:36] Checking telescope [07:37:36] Configuration Complete [07:37:36] Balancing IF system. [07:37:36] Balancing IFRack [07:37:37] Setting State: Activating [07:37:37] Setting State: Ready [07:37:38] the sampler values are: [07:37:38] RF_power 1 : 3.193359 [07:37:38] RF_power 2 : 0.1367188 [07:37:38] RF_power 3 : 3.071289 [07:37:38] RF_power 4 : 0.1123047 [07:37:38] RF_power 5 : 0.3076172 [07:37:38] RF_power 6 : 0.4248047 [07:37:38] RF_power 7 : 0.3027344 [07:37:38] RF_power 8 : 0.6054688 [07:37:38] Balancing VEGAS [07:37:39] Setting State: Activating [07:37:39] Setting State: Ready [07:37:40] Setting State: Activating [07:37:40] Setting State: Ready [07:37:40] source : NGC2415 VELDEF : VOPT-HEL location : J2000 @ (07:36:57.00, 35:14:31.00) velocitydefinition : Optical VEL : 3784.0 restframe : Heliocentric [07:37:40] OnOff: Subscan 1 of 2 [07:37:41] In state Ready, waiting for state Running [07:37:41] Setting State: Activating [07:37:41] Setting State: Committed [07:38:35] Setting State: Running [07:38:35] Detected state Running [07:38:35] *** Notice: This subscan will be numbered as scan #152 in your data reduction package. [07:38:35] In state Running, waiting for state Ready [07:43:37] Setting State: Stopping [07:43:39] Setting State: Ready [07:43:39] Detected state Ready [07:43:39] Ygor Telescope: WaitForStopping [07:43:39] OnOff: Subscan 2 of 2 [07:43:39] In state Ready, waiting for state Running [07:43:39] Setting State: Activating [07:43:39] Setting State: Committed [07:43:49] Setting State: Running [07:43:49] Detected state Running [07:43:49] *** Notice: This subscan will be numbered as scan #153 in your data reduction package. [07:43:49] In state Running, waiting for state Ready [07:48:51] Setting State: Stopping [07:48:53] Setting State: Ready [07:48:53] Detected state Ready [07:48:53] Ygor Telescope: WaitForStopping runSuccessful: True [07:48:54] ******** End Scheduling Block [07:48:54] ******** observer = Michael Fanelli, SB name = 1_Mike_day2, project ID = TGBT21A_501 how much log? 12431 id: 252160self.history: self.history.connection: how much converted log? 12639 ####################################################### ####################################################### SCRIPT NUMBER 7, project:TGBT21A_501_11 252161 1020 Kristen Jones 13 Tyler Hise 2021-02-10 07:51:23 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 11.72 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 2.0 tint = 5.0 vframe = 'helio' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' #changed vframe from bary to helio #because changed velocity reference in source.cat Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/kjones/source_hi.cat') Catalog('/users/psalas/AGBT21A_501_01/source.cat') #Catalog('/users/....../vel_gal2.cat') Slew('NGC2782') # observation sequence of calibrators Configure(HI_OH_config) Balance() # #AutoPeakFocus() #below C-band, don't use AutoPeakFocus(); instead, AutoPeak() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # #Configure(HI_OH_config) #Balance() numobs=2 for i in range(numobs): OnOff('NGC2782', Offset('J2000', '00:08:00', 0), 300) ####################################################### LOG SESSION NUMBER 7 [07:51:23] ******** Begin Scheduling Block [07:51:23] ******** observer = Kristen Jones, SB name = 1_kmj_day2, project ID = TGBT21A_501, date = 10 Feb 2021 [07:51:23] Configuring telescope. [07:51:23] ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [07:51:23] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [07:51:23] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [07:51:23] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [07:51:23] "ERROR: Error: 11.72 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [07:51:23] Default values are [07:51:23] if3freq = [0, 0, 0, 0, 0] [07:51:23] Please fix configuration, then try again [07:51:23] *** Configuration failed! [07:51:23]  [07:51:23] User queried: "Configuration failed! Terminate block?" waiting for reply... [07:51:26] User replied: "Yes". [07:51:27] Exiting scheduling block. runSuccessful: False [07:51:27] ******** End Scheduling Block [07:51:27] ******** observer = Kristen Jones, SB name = 1_kmj_day2, project ID = TGBT21A_501 how much log? 1632 id: 252161self.history: self.history.connection: how much converted log? 1840 ####################################################### ####################################################### SCRIPT NUMBER 8, project:TGBT21A_501_11 252162 1020 Kristen Jones 13 Tyler Hise 2021-02-10 07:51:54 obs_completed ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr1_2' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 1420.4057517,1612.231,1665.4018,1667.3590,1720.5299 nwin=5 bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 2.0 tint = 5.0 vframe = 'helio' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' #changed vframe from bary to helio #because changed velocity reference in source.cat Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/kjones/source_hi.cat') Catalog('/users/psalas/AGBT21A_501_01/source.cat') #Catalog('/users/....../vel_gal2.cat') Slew('NGC2782') # observation sequence of calibrators Configure(HI_OH_config) Balance() # #AutoPeakFocus() #below C-band, don't use AutoPeakFocus(); instead, AutoPeak() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # #Configure(HI_OH_config) #Balance() numobs=2 for i in range(numobs): OnOff('NGC2782', Offset('J2000', '00:08:00', 0), 300) ####################################################### LOG SESSION NUMBER 8 [07:51:54] ******** Begin Scheduling Block [07:51:54] ******** observer = Kristen Jones, SB name = 1_kmj_day2, project ID = TGBT21A_501, date = 10 Feb 2021 [07:51:55] Configuring telescope. [07:51:55] Setting State: Activating [07:51:57] Setting State: Ready [07:51:58] Setting State: Activating [07:51:59] Setting State: Ready [07:51:59] Default values are [07:51:59] if3freq = [0, 0, 0, 0, 0] [07:51:59] notchfilter = In [07:51:59] polswitch = thru [07:51:59] Configuring for backend VEGAS... [07:51:59] The bad devices are: [07:51:59] ConverterFilter14 [07:51:59] ConverterFilter2 [07:51:59] ConverterFilter16 [07:51:59] ConverterFilter10 [07:51:59] ConverterFilter12 [07:51:59] The bad devices are: [07:51:59] ConverterFilter14 [07:51:59] ConverterFilter2 [07:51:59] ConverterFilter16 [07:51:59] ConverterFilter10 [07:51:59] ConverterFilter12 [07:51:59] Waiting for IFRack to finish activating [07:51:59] . . [07:51:59] Finalizing VEGAS config... [07:51:59] Checking telescope [07:51:59] Configuration Complete [07:51:59] source : NGC2782 VELDEF : VOPT-HEL location : J2000 @ (09:14:05.11, 40:06:49.32) velocitydefinition : Optical VEL : 2543.139777 restframe : Heliocentric [07:51:59] Slewing to source. [07:52:00] In state Ready, waiting for state Activating [07:52:00] Setting State: Activating [07:52:00] Detected state Activating [07:52:00] In state Activating, waiting for state Ready [07:53:16] Setting State: Ready [07:53:16] Detected state Ready [07:53:16] Configuring telescope. [07:53:16] Setting State: Activating [07:53:19] Setting State: Ready [07:53:19] Setting State: Activating [07:53:20] Setting State: Ready [07:53:20] Default values are [07:53:20] if3freq = [0, 0, 0, 0, 0] [07:53:20] notchfilter = In [07:53:20] polswitch = thru [07:53:20] Configuring for backend VEGAS... [07:53:20] The bad devices are: [07:53:20] ConverterFilter14 [07:53:20] ConverterFilter2 [07:53:20] ConverterFilter16 [07:53:20] ConverterFilter10 [07:53:20] ConverterFilter12 [07:53:20] The bad devices are: [07:53:20] ConverterFilter14 [07:53:20] ConverterFilter2 [07:53:20] ConverterFilter16 [07:53:20] ConverterFilter10 [07:53:20] ConverterFilter12 [07:53:20] Waiting for IFRack to finish activating [07:53:20] . . [07:53:20] Finalizing VEGAS config... [07:53:20] Checking telescope [07:53:20] Configuration Complete [07:53:21] Balancing IF system. [07:53:21] Balancing IFRack [07:53:21] Setting State: Activating [07:53:23] the sampler values are: [07:53:23] RF_power 1 : 3.413086 [07:53:23] RF_power 2 : 0.1416016 [07:53:23] RF_power 3 : 3.28125 [07:53:23] RF_power 4 : 0.1171875 [07:53:23] RF_power 5 : 0.3173828 [07:53:23] RF_power 6 : 0.4296875 [07:53:23] RF_power 7 : 0.3027344 Setting State: Ready[07:53:23] RF_power 8 : 0.6103516 [07:53:23] Balancing VEGAS [07:53:23] Setting State: Activating [07:53:23] Setting State: Ready [07:53:24] Setting State: Activating [07:53:24] Setting State: Ready [07:53:25] source : 3C196 F1 : 0.05 F2 : 50.0 S22235 : 0.75 S1400 : 14.43 angsize : 7.0 location : J2000 @ (08:13:36.05, 48:13:02.26) [07:53:25] OnOff: Subscan 1 of 2 [07:53:25] In state Ready, waiting for state Running [07:53:25] Setting State: Activating [07:53:26] Setting State: Committed [07:54:18] Setting State: Running [07:54:18] Detected state Running [07:54:18] *** Notice: This subscan will be numbered as scan #154 in your data reduction package. [07:54:18] In state Running, waiting for state Ready [07:55:20] Setting State: Stopping [07:55:22] Setting State: Ready [07:55:22] Detected state Ready [07:55:22] Ygor Telescope: WaitForStopping [07:55:22] OnOff: Subscan 2 of 2 [07:55:22] In state Ready, waiting for state Running [07:55:22] Setting State: Activating [07:55:22] Setting State: Committed [07:55:39] Setting State: Running [07:55:39] Detected state Running [07:55:39] *** Notice: This subscan will be numbered as scan #155 in your data reduction package. [07:55:39] In state Running, waiting for state Ready [07:56:41] Setting State: Stopping [07:56:43] Setting State: Ready [07:56:43] Detected state Ready [07:56:43] Ygor Telescope: WaitForStopping [07:56:43] source : NGC2782 VELDEF : VOPT-HEL location : J2000 @ (09:14:05.11, 40:06:49.32) velocitydefinition : Optical VEL : 2543.139777 restframe : Heliocentric [07:56:43] OnOff: Subscan 1 of 2 [07:56:43] In state Ready, waiting for state Running [07:56:43] Setting State: Activating [07:56:43] Setting State: Committed [07:57:38] Setting State: Running [07:57:38] Detected state Running [07:57:38] *** Notice: This subscan will be numbered as scan #156 in your data reduction package. [07:57:38] In state Running, waiting for state Ready [08:02:40] Setting State: Stopping [08:02:42] Setting State: Ready [08:02:42] Detected state Ready [08:02:42] Ygor Telescope: WaitForStopping [08:02:42] OnOff: Subscan 2 of 2 [08:02:42] In state Ready, waiting for state Running [08:02:42] Setting State: Activating [08:02:42] Setting State: Committed [08:03:01] Setting State: Running [08:03:01] Detected state Running [08:03:01] *** Notice: This subscan will be numbered as scan #157 in your data reduction package. [08:03:01] In state Running, waiting for state Ready [08:08:03] Setting State: Stopping [08:08:05] Setting State: Ready [08:08:05] Detected state Ready [08:08:05] Ygor Telescope: WaitForStopping [08:08:05] source : NGC2782 VELDEF : VOPT-HEL location : J2000 @ (09:14:05.11, 40:06:49.32) velocitydefinition : Optical VEL : 2543.139777 restframe : Heliocentric [08:08:05] OnOff: Subscan 1 of 2 [08:08:05] In state Ready, waiting for state Running [08:08:05] Setting State: Activating [08:08:05] Setting State: Committed [08:08:24] Setting State: Running [08:08:24] Detected state Running [08:08:24] *** Notice: This subscan will be numbered as scan #158 in your data reduction package. [08:08:24] In state Running, waiting for state Ready [08:13:26] Setting State: Stopping [08:13:28] Setting State: Ready [08:13:28] Detected state Ready [08:13:28] Ygor Telescope: WaitForStopping [08:13:28] OnOff: Subscan 2 of 2 [08:13:28] In state Ready, waiting for state Running [08:13:28] Setting State: Activating [08:13:28] Setting State: Committed [08:13:47] Setting State: Running [08:13:47] Detected state Running [08:13:47] *** Notice: This subscan will be numbered as scan #159 in your data reduction package. [08:13:47] In state Running, waiting for state Ready [08:18:49] Setting State: Stopping [08:18:51] Setting State: Ready [08:18:51] Detected state Ready [08:18:51] Ygor Telescope: WaitForStopping runSuccessful: True [08:18:51] ******** End Scheduling Block [08:18:51] ******** observer = Kristen Jones, SB name = 1_kmj_day2, project ID = TGBT21A_501 how much log? 7162 id: 252162self.history: self.history.connection: how much converted log? 7366 ####################################################### ####################################################### SCRIPT NUMBER 9, project:TGBT21A_501_11 252163 1016 Haruka Sakemi 13 Tyler Hise 2021-02-10 08:23:07 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr4_6' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 4500.0, 5000.0, 5500.0, 6000.0 nwin=4 bandwidth = 187.5 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 1.0 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('ScoX-1') # observation sequence of Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=30 for i in range(numobs): OnOff('ScoX-1', Offset('J2000', '00:08:00', 0), 10) ####################################################### LOG SESSION NUMBER 9 [08:23:07] ******** Begin Scheduling Block [08:23:07] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501, date = 10 Feb 2021 [08:23:07] Configuring telescope. [08:23:07] ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [08:23:07] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [08:23:07] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [08:23:07] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [08:23:07] "ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [08:23:07] Default values are [08:23:07] if3freq = [0, 0, 0, 0] [08:23:07] Please fix configuration, then try again [08:23:07] *** Configuration failed! [08:23:07]  [08:23:07] User queried: "Configuration failed! Terminate block?" waiting for reply... [08:23:14] User replied: "No". [08:23:14] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:23:15] Slewing to source. [08:23:15] In state Ready, waiting for state Activating [08:23:15] Setting State: Activating [08:23:15] Detected state Activating [08:23:15] In state Activating, waiting for state Ready [08:26:48] Setting State: Aborting [08:26:48] ygor.Telescope: WaitForReady: Asking abort confirmation. [08:26:48]  [08:26:48] User queried: "Abort detected! Terminate block?" waiting for reply... [08:26:51] User replied: "Yes". [08:26:51] Exiting scheduling block. [08:26:51] Setting State: Ready runSuccessful: False [08:26:51] ******** End Scheduling Block [08:26:51] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501 how much log? 2346 id: 252163self.history: self.history.connection: how much converted log? 2554 ####################################################### ####################################################### SCRIPT NUMBER 10, project:TGBT21A_501_11 252164 1016 Haruka Sakemi 13 Tyler Hise 2021-02-10 08:26:53 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr4_6' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 4500.0, 5000.0, 5500.0, 6000.0 nwin=4 bandwidth = 187.5 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 1.0 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('ScoX-1') # observation sequence of Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C196', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=30 for i in range(numobs): OnOff('ScoX-1', Offset('J2000', '00:08:00', 0), 10) ####################################################### LOG SESSION NUMBER 10 [08:26:53] ******** Begin Scheduling Block [08:26:53] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501, date = 10 Feb 2021 [08:26:53] Configuring telescope. [08:26:53] ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [08:26:53] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [08:26:53] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [08:26:53] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [08:26:53] "ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [08:26:53] Default values are [08:26:53] if3freq = [0, 0, 0, 0] [08:26:53] Please fix configuration, then try again [08:26:53] *** Configuration failed! [08:26:53]  [08:26:53] User queried: "Configuration failed! Terminate block?" waiting for reply... [08:26:58] User replied: "Yes". [08:26:58] Exiting scheduling block. runSuccessful: False [08:26:58] ******** End Scheduling Block [08:26:58] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501 how much log? 1627 id: 252164self.history: self.history.connection: how much converted log? 1835 ####################################################### ####################################################### SCRIPT NUMBER 11, project:TGBT21A_501_11 252165 1016 Haruka Sakemi 13 Tyler Hise 2021-02-10 08:27:28 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr4_6' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 4500.0, 5000.0, 5500.0, 6000.0 nwin=4 bandwidth = 187.5 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 1.0 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('ScoX-1') # observation sequence of Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C348', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=30 for i in range(numobs): OnOff('ScoX-1', Offset('J2000', '00:08:00', 0), 10) ####################################################### LOG SESSION NUMBER 11 [08:27:28] ******** Begin Scheduling Block [08:27:28] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501, date = 10 Feb 2021 [08:27:28] Configuring telescope. [08:27:28] ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. [08:27:28] Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. [08:27:28] Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. [08:27:28] To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. [08:27:28] "ERROR: Error: 187.5 is an illegal bandwidth or is invalid with the specified vegas.subband value. Legal VEGAS bandwidths are: (11.72, 16.9, 23.44, 100, 187.5, 1080, and 1500. Bandwidths of 16.9 and 23.44 are allowed when vegas.subband=8. Bandwidths of 11.72, 23.44, 100, 187.5, 1080, and 1500 are allowed when vegas.subband = 1. To reset the subband mode from a previous configuration use 'vegas.subband=None' in your Configuration statement. " [08:27:28] Default values are [08:27:28] if3freq = [0, 0, 0, 0] [08:27:28] Please fix configuration, then try again [08:27:28] *** Configuration failed! [08:27:28]  [08:27:28] User queried: "Configuration failed! Terminate block?" waiting for reply... [08:27:33] User replied: "Yes". [08:27:33] Exiting scheduling block. runSuccessful: False [08:27:33] ******** End Scheduling Block [08:27:33] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501 how much log? 1627 id: 252165self.history: self.history.connection: how much converted log? 1835 ####################################################### ####################################################### SCRIPT NUMBER 12, project:TGBT21A_501_11 252166 1016 Haruka Sakemi 13 Tyler Hise 2021-02-10 08:31:28 obs_aborted ####################################################### # GBT Observing: TGBT21A_501 #Total power position switch, L-band, VEGAS # setup backend configuration HI_OH_config =''' receiver = 'Rcvr4_6' obstype = 'Spectroscopy' backend = 'VEGAS' restfreq = 4500.0,4750.0, 5000.0, 5250.0, 5500.0, 5750.0, 6000.0, 6250.0 nwin=8 bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1.0 tint = 1.0 vframe = 'bary' vdef = 'Optical' noisecal = 'lo' pol='Linear' ''' Configure(HI_OH_config) # setup catalog of calibrators Catalog('fluxcal') Catalog('/users/psalas/AGBT21A_501_01/source.cat') Slew('ScoX-1') # observation sequence of Configure(HI_OH_config) Balance() # AutoPeakFocus() OnOff('3C348', Offset('J2000', 0.0, 1.0, cosv=True), 60) # Configure(HI_OH_config) Balance() numobs=30 for i in range(numobs): OnOff('ScoX-1', Offset('J2000', '00:08:00', 0), 10) ####################################################### LOG SESSION NUMBER 12 [08:31:28] ******** Begin Scheduling Block [08:31:28] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501, date = 10 Feb 2021 [08:31:28] Configuring telescope. [08:31:29] Setting State: Activating [08:31:51] Setting State: Ready [08:31:51] Setting State: Activating [08:31:51] Setting State: Ready [08:31:53] Setting State: Activating [08:31:54] Setting State: Ready [08:31:54] Default values are [08:31:54] if3freq = [0, 0, 0, 0, 0, 0, 0, 0] [08:31:54] Configuring for backend VEGAS... [08:31:54] The bad devices are: [08:31:54] ConverterFilter14 [08:31:54] ConverterFilter2 [08:31:54] ConverterFilter16 [08:31:54] ConverterFilter10 [08:31:54] ConverterFilter12 [08:31:54] The bad devices are: [08:31:54] ConverterFilter14 [08:31:54] ConverterFilter2 [08:31:54] ConverterFilter16 [08:31:54] ConverterFilter10 [08:31:54] ConverterFilter12 [08:31:54] Waiting for IFRack to finish activating [08:31:54] . . . Waiting for ScanCoordinator to finish activating [08:31:54] . . . . . . . . . . . . . . . . . . . . [08:31:54] Finalizing VEGAS config... [08:31:54] Checking telescope [08:31:54] Configuration Complete [08:31:54] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:31:54] Slewing to source. [08:31:54] In state Ready, waiting for state Activating [08:31:54] Setting State: Activating [08:31:54] Detected state Activating [08:31:54] In state Activating, waiting for state Ready [08:33:16] Setting State: Ready [08:33:16] Detected state Ready [08:33:16] Configuring telescope. [08:33:16] Setting State: Activating [08:33:18] Setting State: Ready [08:33:19] Setting State: Activating [08:33:20] Setting State: Ready [08:33:20] Default values are [08:33:20] if3freq = [0, 0, 0, 0, 0, 0, 0, 0] [08:33:20] Configuring for backend VEGAS... [08:33:20] The bad devices are: [08:33:20] ConverterFilter14 [08:33:20] ConverterFilter2 [08:33:20] ConverterFilter16 [08:33:20] ConverterFilter10 [08:33:20] ConverterFilter12 [08:33:20] The bad devices are: [08:33:20] ConverterFilter14 [08:33:20] ConverterFilter2 [08:33:20] ConverterFilter16 [08:33:20] ConverterFilter10 [08:33:20] ConverterFilter12 [08:33:20] Waiting for ActiveSurface to finish activating [08:33:20] . . [08:33:20] Finalizing VEGAS config... [08:33:20] Checking telescope [08:33:20] Configuration Complete [08:33:21] Balancing IF system. [08:33:21] Balancing IFRack [08:33:23] the sampler values are: [08:33:23] RF_power 1 : 3.31543 [08:33:23] RF_power 2 : 0.06835938 [08:33:23] RF_power 3 : 2.763672 [08:33:23] RF_power 4 : 0.08789062 [08:33:23] RF_power 5 : 0.4882812 [08:33:23] RF_power 6 : 2.807617 [08:33:23] RF_power 7 : 0.4736328 [08:33:23] RF_power 8 : 9.995117 [08:33:23] Balancing VEGAS [08:33:23] Setting State: Activating [08:33:24] Setting State: Ready [08:33:25] Setting State: Activating [08:33:25] Setting State: Ready [08:33:27] Setting State: Activating [08:33:27] Setting State: Ready [08:33:29] Setting State: Activating [08:33:29] Setting State: Ready [08:33:30] Configuring telescope. [08:33:30] Setting State: Activating [08:33:33] Setting State: Ready [08:33:33] Setting State: Activating [08:33:34] Setting State: Ready [08:33:34] Default values are [08:33:34] if3freq = [0] [08:33:34] Configuring for backend DCR... [08:33:34] The bad devices are: [08:33:34] ConverterFilter14 [08:33:34] ConverterFilter2 [08:33:34] ConverterFilter16 [08:33:34] ConverterFilter10 [08:33:34] ConverterFilter12 [08:33:34] Waiting for ActiveSurface to finish activating [08:33:34] . . [08:33:34] Checking telescope [08:33:34] Configuration Complete [08:33:34] Balancing IF system. [08:33:34] Balancing IFRack [08:33:35] Setting State: Activating [08:33:36] Setting State: Ready [08:33:36] the sampler values are: [08:33:36] RF_power 1 : 0.01464844 [08:33:36] RF_power 2 : 0.9863281 [08:33:36] RF_power 3 : -0.09277344 [08:33:36] RF_power 4 : 0.9130859 [08:33:36] RF_power 5 : 0.4931641 [08:33:36] RF_power 6 : 2.651367 [08:33:36] RF_power 7 : 0.4736328 [08:33:36] RF_power 8 : 3.00293 [08:33:36] Searching for calibrator with at least 0.50 Jy at 5000 MHz within 10.0 degrees of [16:19:55.09, -15:38:25.11] (J2000). [08:33:37] Estimated slew time to 1623-1140 is 0.12 minutes [08:33:37] Calibrator 1623-1140 at 5000.00 MHz emitting 0.74 Jy, 4.1 degrees away at [16:23:59.52, -11:40:43.79] (J2000). [08:33:37] source : 1623-1140 [08:33:37] Slewing to source. [08:33:37] In state Ready, waiting for state Activating [08:33:37] Setting State: Activating [08:33:37] Detected state Activating [08:33:37] In state Activating, waiting for state Ready [08:34:02] Setting State: Ready [08:34:02] Detected state Ready [08:34:02] Balancing IF system. [08:34:02] Balancing IFRack [08:34:03] Setting State: Activating [08:34:03] Setting State: Ready [08:34:04] the sampler values are: [08:34:04] RF_power 1 : 0.01464844 [08:34:04] RF_power 2 : 0.8251953 [08:34:04] RF_power 3 : -0.09277344 [08:34:04] RF_power 4 : 0.9277344 [08:34:05] RF_power 5 : 0.4736328 [08:34:05] RF_power 6 : 3.198242 [08:34:05] RF_power 7 : 0.4541016 [08:34:05] RF_power 8 : 2.509766 [08:34:05] Peak: Subscan 1 of 4 [08:34:05] In state Ready, waiting for state Running [08:34:06] Setting State: Activating [08:34:15] Setting State: Committed [08:34:18] Setting State: Running [08:34:18] Detected state Running [08:34:18] *** Notice: This subscan will be numbered as scan #160 in your data reduction package. [08:34:18] In state Running, waiting for state Ready [08:34:47] Setting State: Stopping [08:34:50] Setting State: Ready [08:34:50] Detected state Ready [08:34:50] Ygor Telescope: WaitForStopping [08:34:50] Peak: Subscan 2 of 4 [08:34:50] In state Ready, waiting for state Running [08:34:51] Setting State: Activating [08:34:55] Setting State: Committed [08:34:58] Setting State: Running [08:34:58] Detected state Running [08:34:58] *** Notice: This subscan will be numbered as scan #161 in your data reduction package. [08:34:58] In state Running, waiting for state Ready [08:35:27] Setting State: Stopping [08:35:30] Setting State: Ready [08:35:30] Detected state Ready [08:35:30] Ygor Telescope: WaitForStopping [08:35:31] . *** Updating antenna's pointing to az2=0.4098 and el=0.0000 arcmins [08:35:31] Peak: Subscan 3 of 4 [08:35:31] In state Ready, waiting for state Running [08:35:32] Setting State: Activating [08:35:41] Setting State: Committed [08:35:44] Setting State: Running [08:35:44] Detected state Running [08:35:44] *** Notice: This subscan will be numbered as scan #162 in your data reduction package. [08:35:44] In state Running, waiting for state Ready [08:36:13] Setting State: Stopping [08:36:16] Setting State: Ready [08:36:16] Detected state Ready [08:36:16] Ygor Telescope: WaitForStopping [08:36:16] Peak: Subscan 4 of 4 [08:36:16] In state Ready, waiting for state Running [08:36:17] Setting State: Activating [08:36:21] Setting State: Committed [08:36:24] Setting State: Running [08:36:24] Detected state Running [08:36:24] *** Notice: This subscan will be numbered as scan #163 in your data reduction package. [08:36:24] In state Running, waiting for state Ready [08:36:53] Setting State: Stopping [08:36:56] Setting State: Ready [08:36:56] Detected state Ready [08:36:56] Ygor Telescope: WaitForStopping [08:36:57] . *** Updating antenna's pointing to az2=0.4098 and el=0.1112 arcmins [08:36:57] Focus: Subscan 1 of 1 [08:36:57] In state Ready, waiting for state Running [08:36:58] Setting State: Activating [08:37:24] Setting State: Committed [08:37:27] Setting State: Running [08:37:27] Detected state Running [08:37:27] *** Notice: This subscan will be numbered as scan #164 in your data reduction package. [08:37:27] In state Running, waiting for state Ready [08:38:26] Setting State: Stopping [08:38:28] Setting State: Ready [08:38:28] Detected state Ready [08:38:28] Ygor Telescope: WaitForStopping [08:38:29] *** Updating antenna's focus to 5.83 mm [08:38:30] source : 3C348 F1 : 0.4 F2 : 10.6 location : J2000 @ (16:51:08.30, 04:59:26.00) S1400 : 45.0 angsize : 170.0 [08:38:30] OnOff: Subscan 1 of 2 [08:38:30] In state Ready, waiting for state Running [08:38:31] Setting State: Activating [08:39:26] Setting State: Committed [08:39:29] Setting State: Running [08:39:29] Detected state Running [08:39:29] *** Notice: This subscan will be numbered as scan #165 in your data reduction package. [08:39:29] In state Running, waiting for state Ready [08:40:28] Setting State: Stopping [08:40:30] Setting State: Ready [08:40:30] Detected state Ready [08:40:30] Ygor Telescope: WaitForStopping [08:40:30] OnOff: Subscan 2 of 2 [08:40:30] In state Ready, waiting for state Running [08:40:31] Setting State: Activating [08:40:43] Setting State: Committed [08:40:46] Setting State: Running [08:40:46] Detected state Running [08:40:46] *** Notice: This subscan will be numbered as scan #166 in your data reduction package. [08:40:46] In state Running, waiting for state Ready [08:41:45] Setting State: Stopping [08:41:47] Setting State: Ready [08:41:47] Detected state Ready [08:41:47] Ygor Telescope: WaitForStopping [08:41:47] Configuring telescope. [08:41:47] Setting State: Activating [08:41:49] Setting State: Ready [08:41:50] Setting State: Activating [08:41:51] Setting State: Ready [08:41:51] Default values are [08:41:51] if3freq = [0, 0, 0, 0, 0, 0, 0, 0] [08:41:51] Configuring for backend VEGAS... [08:41:51] The bad devices are: [08:41:51] ConverterFilter14 [08:41:51] ConverterFilter2 [08:41:51] ConverterFilter16 [08:41:51] ConverterFilter10 [08:41:51] ConverterFilter12 [08:41:51] The bad devices are: [08:41:51] ConverterFilter14 [08:41:51] ConverterFilter2 [08:41:51] ConverterFilter16 [08:41:51] ConverterFilter10 [08:41:51] ConverterFilter12 [08:41:51] Waiting for IFRack to finish activating [08:41:51] . . [08:41:51] Finalizing VEGAS config... [08:41:51] Checking telescope [08:41:51] Configuration Complete [08:41:51] Balancing IF system. [08:41:51] Balancing IFRack [08:41:52] Setting State: Activating [08:41:53] Setting State: Ready [08:41:53] the sampler values are: [08:41:54] RF_power 1 : 3.671875 [08:41:54] RF_power 2 : 0 [08:41:54] RF_power 3 : 2.456055 [08:41:54] RF_power 4 : 0.009765625 [08:41:54] RF_power 5 : 0.4199219 [08:41:54] RF_power 6 : 3.120117 [08:41:54] RF_power 7 : 0.4101562 [08:41:54] RF_power 8 : 2.77832 [08:41:54] Balancing VEGAS [08:41:54] Setting State: Activating [08:41:54] Setting State: Ready [08:41:55] Setting State: Activating [08:41:55] Setting State: Ready [08:41:55] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:41:56] OnOff: Subscan 1 of 2 [08:41:56] In state Ready, waiting for state Running [08:41:57] Setting State: Activating [08:41:57] Setting State: Committed [08:42:59] Setting State: Running [08:42:59] Detected state Running [08:42:59] *** Notice: This subscan will be numbered as scan #167 in your data reduction package. [08:42:59] In state Running, waiting for state Ready [08:43:11] Setting State: Stopping [08:43:13] Setting State: Ready [08:43:13] Detected state Ready [08:43:13] Ygor Telescope: WaitForStopping [08:43:13] OnOff: Subscan 2 of 2 [08:43:13] In state Ready, waiting for state Running [08:43:14] Setting State: Activating [08:43:14] Setting State: Committed [08:43:31] Setting State: Running [08:43:31] Detected state Running [08:43:31] *** Notice: This subscan will be numbered as scan #168 in your data reduction package. [08:43:31] In state Running, waiting for state Ready [08:43:43] Setting State: Stopping [08:43:45] Setting State: Ready [08:43:45] Detected state Ready [08:43:45] Ygor Telescope: WaitForStopping [08:43:45] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:43:45] OnOff: Subscan 1 of 2 [08:43:45] In state Ready, waiting for state Running [08:43:46] Setting State: Activating [08:43:46] Setting State: Committed [08:44:03] Setting State: Running [08:44:03] Detected state Running [08:44:03] *** Notice: This subscan will be numbered as scan #169 in your data reduction package. [08:44:03] In state Running, waiting for state Ready [08:44:15] Setting State: Stopping [08:44:17] Setting State: Ready [08:44:17] Detected state Ready [08:44:17] Ygor Telescope: WaitForStopping [08:44:17] OnOff: Subscan 2 of 2 [08:44:18] In state Ready, waiting for state Running [08:44:19] Setting State: Activating [08:44:19] Setting State: Committed [08:44:35] Setting State: Running [08:44:35] Detected state Running [08:44:35] *** Notice: This subscan will be numbered as scan #170 in your data reduction package. [08:44:35] In state Running, waiting for state Ready [08:44:44] Setting State: Aborting [08:44:44] ygor.Telescope: RuntimeError msg: Abort detected! [08:44:44] ygor.Telescope: WaitForRunning: Asking abort confirmation. [08:44:44]  [08:44:44] User queried: "Abort detected! Terminate block?" waiting for reply... [08:44:45] Setting State: Ready [08:44:51] User replied: "No". [08:44:51] In state Ready, waiting for state Ready [08:44:51] Detected state Ready [08:44:51] Ygor Telescope: WaitForStopping [08:44:51] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:44:51] OnOff: Subscan 1 of 2 [08:44:52] In state Ready, waiting for state Running [08:44:52] Setting State: Activating [08:44:52] Setting State: Committed [08:45:09] Setting State: Running [08:45:09] Detected state Running [08:45:09] *** Notice: This subscan will be numbered as scan #171 in your data reduction package. [08:45:09] In state Running, waiting for state Ready [08:45:21] Setting State: Stopping [08:45:23] Setting State: Ready [08:45:23] Detected state Ready [08:45:23] Ygor Telescope: WaitForStopping [08:45:23] OnOff: Subscan 2 of 2 [08:45:23] In state Ready, waiting for state Running [08:45:24] Setting State: Activating [08:45:24] Setting State: Committed [08:45:41] Setting State: Running [08:45:41] Detected state Running [08:45:41] *** Notice: This subscan will be numbered as scan #172 in your data reduction package. [08:45:41] In state Running, waiting for state Ready [08:45:53] Setting State: Stopping [08:45:55] Setting State: Ready [08:45:55] Detected state Ready [08:45:55] Ygor Telescope: WaitForStopping [08:45:55] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:45:55] OnOff: Subscan 1 of 2 [08:45:55] In state Ready, waiting for state Running [08:45:56] Setting State: Activating [08:45:56] Setting State: Committed [08:46:13] Setting State: Running [08:46:13] Detected state Running [08:46:13] *** Notice: This subscan will be numbered as scan #173 in your data reduction package. [08:46:13] In state Running, waiting for state Ready [08:46:25] Setting State: Stopping [08:46:27] Setting State: Ready [08:46:27] Detected state Ready [08:46:27] Ygor Telescope: WaitForStopping [08:46:27] OnOff: Subscan 2 of 2 [08:46:27] In state Ready, waiting for state Running [08:46:28] Setting State: Activating [08:46:28] Setting State: Committed [08:46:48] Setting State: Running [08:46:48] Detected state Running [08:46:48] *** Notice: This subscan will be numbered as scan #174 in your data reduction package. [08:46:48] In state Running, waiting for state Ready [08:47:00] Setting State: Stopping [08:47:02] Setting State: Ready [08:47:02] Detected state Ready [08:47:02] Ygor Telescope: WaitForStopping [08:47:02] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:47:02] OnOff: Subscan 1 of 2 [08:47:03] In state Ready, waiting for state Running [08:47:03] Setting State: Activating [08:47:04] Setting State: Committed [08:47:20] Setting State: Running [08:47:20] Detected state Running [08:47:20] *** Notice: This subscan will be numbered as scan #175 in your data reduction package. [08:47:20] In state Running, waiting for state Ready [08:47:32] Setting State: Stopping [08:47:34] Setting State: Ready [08:47:34] Detected state Ready [08:47:34] Ygor Telescope: WaitForStopping [08:47:34] OnOff: Subscan 2 of 2 [08:47:34] In state Ready, waiting for state Running [08:47:35] Setting State: Activating [08:47:35] Setting State: Committed [08:47:52] Setting State: Running [08:47:52] Detected state Running [08:47:52] *** Notice: This subscan will be numbered as scan #176 in your data reduction package. [08:47:52] In state Running, waiting for state Ready [08:48:04] Setting State: Stopping [08:48:06] Setting State: Ready [08:48:06] Detected state Ready [08:48:06] Ygor Telescope: WaitForStopping [08:48:06] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:48:06] OnOff: Subscan 1 of 2 [08:48:06] In state Ready, waiting for state Running [08:48:07] Setting State: Activating [08:48:07] Setting State: Committed [08:48:24] Setting State: Running [08:48:24] Detected state Running [08:48:24] *** Notice: This subscan will be numbered as scan #177 in your data reduction package. [08:48:24] In state Running, waiting for state Ready [08:48:36] Setting State: Stopping [08:48:38] Setting State: Ready [08:48:38] Detected state Ready [08:48:38] Ygor Telescope: WaitForStopping [08:48:38] OnOff: Subscan 2 of 2 [08:48:38] In state Ready, waiting for state Running [08:48:39] Setting State: Activating [08:48:39] Setting State: Committed [08:48:56] Setting State: Running [08:48:56] Detected state Running [08:48:56] *** Notice: This subscan will be numbered as scan #178 in your data reduction package. [08:48:56] In state Running, waiting for state Ready [08:49:08] Setting State: Stopping [08:49:10] Setting State: Ready [08:49:10] Detected state Ready [08:49:10] Ygor Telescope: WaitForStopping [08:49:10] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:49:10] OnOff: Subscan 1 of 2 [08:49:10] In state Ready, waiting for state Running [08:49:11] Setting State: Activating [08:49:11] Setting State: Committed [08:49:28] Setting State: Running [08:49:28] Detected state Running [08:49:28] *** Notice: This subscan will be numbered as scan #179 in your data reduction package. [08:49:28] In state Running, waiting for state Ready [08:49:40] Setting State: Stopping [08:49:42] Setting State: Ready [08:49:42] Detected state Ready [08:49:42] Ygor Telescope: WaitForStopping [08:49:42] OnOff: Subscan 2 of 2 [08:49:42] In state Ready, waiting for state Running [08:49:43] Setting State: Activating [08:49:43] Setting State: Committed [08:50:00] Setting State: Running [08:50:00] Detected state Running [08:50:00] *** Notice: This subscan will be numbered as scan #180 in your data reduction package. [08:50:00] In state Running, waiting for state Ready [08:50:12] Setting State: Stopping [08:50:14] Setting State: Ready [08:50:14] Detected state Ready [08:50:14] Ygor Telescope: WaitForStopping [08:50:14] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:50:14] OnOff: Subscan 1 of 2 [08:50:14] In state Ready, waiting for state Running [08:50:15] Setting State: Activating [08:50:15] Setting State: Committed [08:50:32] Setting State: Running [08:50:32] Detected state Running [08:50:32] *** Notice: This subscan will be numbered as scan #181 in your data reduction package. [08:50:32] In state Running, waiting for state Ready [08:50:44] Setting State: Stopping [08:50:46] Setting State: Ready [08:50:46] Detected state Ready [08:50:46] Ygor Telescope: WaitForStopping [08:50:46] OnOff: Subscan 2 of 2 [08:50:46] In state Ready, waiting for state Running [08:50:47] Setting State: Activating [08:50:47] Setting State: Committed [08:51:04] Setting State: Running [08:51:04] Detected state Running [08:51:04] *** Notice: This subscan will be numbered as scan #182 in your data reduction package. [08:51:04] In state Running, waiting for state Ready [08:51:16] Setting State: Stopping [08:51:18] Setting State: Ready [08:51:18] Detected state Ready [08:51:18] Ygor Telescope: WaitForStopping [08:51:18] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:51:18] OnOff: Subscan 1 of 2 [08:51:18] In state Ready, waiting for state Running [08:51:19] Setting State: Activating [08:51:20] Setting State: Committed [08:51:36] Setting State: Running [08:51:36] Detected state Running [08:51:36] *** Notice: This subscan will be numbered as scan #183 in your data reduction package. [08:51:36] In state Running, waiting for state Ready [08:51:48] Setting State: Stopping [08:51:50] Setting State: Ready [08:51:50] Detected state Ready [08:51:50] Ygor Telescope: WaitForStopping [08:51:50] OnOff: Subscan 2 of 2 [08:51:50] In state Ready, waiting for state Running [08:51:51] Setting State: Activating [08:51:51] Setting State: Committed [08:52:08] Setting State: Running [08:52:08] Detected state Running [08:52:08] *** Notice: This subscan will be numbered as scan #184 in your data reduction package. [08:52:08] In state Running, waiting for state Ready [08:52:20] Setting State: Stopping [08:52:22] Setting State: Ready [08:52:22] Detected state Ready [08:52:22] Ygor Telescope: WaitForStopping [08:52:22] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:52:22] OnOff: Subscan 1 of 2 [08:52:22] In state Ready, waiting for state Running [08:52:23] Setting State: Activating [08:52:23] Setting State: Committed [08:52:40] Setting State: Running [08:52:40] Detected state Running [08:52:40] *** Notice: This subscan will be numbered as scan #185 in your data reduction package. [08:52:40] In state Running, waiting for state Ready [08:52:52] Setting State: Stopping [08:52:54] Setting State: Ready [08:52:54] Detected state Ready [08:52:54] Ygor Telescope: WaitForStopping [08:52:54] OnOff: Subscan 2 of 2 [08:52:54] In state Ready, waiting for state Running [08:52:55] Setting State: Activating [08:52:55] Setting State: Committed [08:53:12] Setting State: Running [08:53:12] Detected state Running [08:53:12] *** Notice: This subscan will be numbered as scan #186 in your data reduction package. [08:53:12] In state Running, waiting for state Ready [08:53:24] Setting State: Stopping [08:53:26] Setting State: Ready [08:53:26] Detected state Ready [08:53:26] Ygor Telescope: WaitForStopping [08:53:26] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:53:26] OnOff: Subscan 1 of 2 [08:53:26] In state Ready, waiting for state Running [08:53:27] Setting State: Activating [08:53:27] Setting State: Committed [08:53:44] Setting State: Running [08:53:44] Detected state Running [08:53:44] *** Notice: This subscan will be numbered as scan #187 in your data reduction package. [08:53:44] In state Running, waiting for state Ready [08:53:56] Setting State: Stopping [08:53:58] Setting State: Ready [08:53:58] Detected state Ready [08:53:58] Ygor Telescope: WaitForStopping [08:53:58] OnOff: Subscan 2 of 2 [08:53:58] In state Ready, waiting for state Running [08:53:59] Setting State: Activating [08:53:59] Setting State: Committed [08:54:16] Setting State: Running [08:54:16] Detected state Running [08:54:16] *** Notice: This subscan will be numbered as scan #188 in your data reduction package. [08:54:16] In state Running, waiting for state Ready [08:54:28] Setting State: Stopping [08:54:30] Setting State: Ready [08:54:30] Detected state Ready [08:54:30] Ygor Telescope: WaitForStopping [08:54:30] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:54:30] OnOff: Subscan 1 of 2 [08:54:30] In state Ready, waiting for state Running [08:54:31] Setting State: Activating [08:54:31] Setting State: Committed [08:54:48] Setting State: Running [08:54:48] Detected state Running [08:54:48] *** Notice: This subscan will be numbered as scan #189 in your data reduction package. [08:54:48] In state Running, waiting for state Ready [08:55:00] Setting State: Stopping [08:55:02] Setting State: Ready [08:55:02] Detected state Ready [08:55:02] Ygor Telescope: WaitForStopping [08:55:02] OnOff: Subscan 2 of 2 [08:55:02] In state Ready, waiting for state Running [08:55:03] Setting State: Activating [08:55:03] Setting State: Committed [08:55:20] Setting State: Running [08:55:20] Detected state Running [08:55:20] *** Notice: This subscan will be numbered as scan #190 in your data reduction package. [08:55:20] In state Running, waiting for state Ready [08:55:32] Setting State: Stopping [08:55:34] Setting State: Ready [08:55:34] Detected state Ready [08:55:34] Ygor Telescope: WaitForStopping [08:55:34] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:55:34] OnOff: Subscan 1 of 2 [08:55:34] In state Ready, waiting for state Running [08:55:35] Setting State: Activating [08:55:35] Setting State: Committed [08:55:52] Setting State: Running [08:55:52] Detected state Running [08:55:52] *** Notice: This subscan will be numbered as scan #191 in your data reduction package. [08:55:52] In state Running, waiting for state Ready [08:56:04] Setting State: Stopping [08:56:06] Setting State: Ready [08:56:06] Detected state Ready [08:56:06] Ygor Telescope: WaitForStopping [08:56:06] OnOff: Subscan 2 of 2 [08:56:06] In state Ready, waiting for state Running [08:56:07] Setting State: Activating [08:56:07] Setting State: Committed [08:56:24] Setting State: Running [08:56:24] Detected state Running [08:56:24] *** Notice: This subscan will be numbered as scan #192 in your data reduction package. [08:56:24] In state Running, waiting for state Ready [08:56:36] Setting State: Stopping [08:56:38] Setting State: Ready [08:56:38] Detected state Ready [08:56:38] Ygor Telescope: WaitForStopping [08:56:38] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:56:38] OnOff: Subscan 1 of 2 [08:56:38] In state Ready, waiting for state Running [08:56:39] Setting State: Activating [08:56:39] Setting State: Committed [08:56:56] Setting State: Running [08:56:56] Detected state Running [08:56:56] *** Notice: This subscan will be numbered as scan #193 in your data reduction package. [08:56:56] In state Running, waiting for state Ready [08:57:08] Setting State: Stopping [08:57:10] Setting State: Ready [08:57:10] Detected state Ready [08:57:10] Ygor Telescope: WaitForStopping [08:57:10] OnOff: Subscan 2 of 2 [08:57:10] In state Ready, waiting for state Running [08:57:11] Setting State: Activating [08:57:11] Setting State: Committed [08:57:28] Setting State: Running [08:57:28] Detected state Running [08:57:28] *** Notice: This subscan will be numbered as scan #194 in your data reduction package. [08:57:28] In state Running, waiting for state Ready [08:57:40] Setting State: Stopping [08:57:42] Setting State: Ready [08:57:42] Detected state Ready [08:57:42] Ygor Telescope: WaitForStopping [08:57:42] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:57:42] OnOff: Subscan 1 of 2 [08:57:43] In state Ready, waiting for state Running [08:57:44] Setting State: Activating [08:57:44] Setting State: Committed [08:58:01] Setting State: Running [08:58:01] Detected state Running [08:58:01] *** Notice: This subscan will be numbered as scan #195 in your data reduction package. [08:58:01] In state Running, waiting for state Ready [08:58:13] Setting State: Stopping [08:58:15] Setting State: Ready [08:58:15] Detected state Ready [08:58:15] Ygor Telescope: WaitForStopping [08:58:15] OnOff: Subscan 2 of 2 [08:58:16] In state Ready, waiting for state Running [08:58:17] Setting State: Activating [08:58:17] Setting State: Committed [08:58:34] Setting State: Running [08:58:34] Detected state Running [08:58:34] *** Notice: This subscan will be numbered as scan #196 in your data reduction package. [08:58:34] In state Running, waiting for state Ready [08:58:46] Setting State: Stopping [08:58:48] Setting State: Ready [08:58:48] Detected state Ready [08:58:48] Ygor Telescope: WaitForStopping [08:58:48] source : ScoX-1 VELDEF : VRAD-LSR location : J2000 @ (16:19:55.07, -15:38:25.02) velocitydefinition : Radio VEL : 0.0 restframe : KinematicalLSR [08:58:48] OnOff: Subscan 1 of 2 [08:58:48] In state Ready, waiting for state Running [08:58:49] Setting State: Activating [08:58:49] Setting State: Committed [08:59:06] Setting State: Running [08:59:06] Detected state Running [08:59:06] *** Notice: This subscan will be numbered as scan #197 in your data reduction package. [08:59:06] In state Running, waiting for state Ready [08:59:08] Setting State: Aborting [08:59:08] ygor.Telescope: RuntimeError msg: Abort detected! [08:59:08] ygor.Telescope: WaitForRunning: Asking abort confirmation. [08:59:08]  [08:59:08] User queried: "Abort detected! Terminate block?" waiting for reply... [08:59:09] Setting State: Ready [08:59:16] User replied: "Yes". [08:59:16] Exiting scheduling block. runSuccessful: False [08:59:16] ******** End Scheduling Block [08:59:16] ******** observer = Haruka Sakemi, SB name = G1_ScoX-1, project ID = TGBT21A_501 how much log? 32103 id: 252166self.history: self.history.connection: how much converted log? 32311 #######################################################