####################################################### SCRIPT NUMBER 1, project:TGBT22A_503_02 264651 93 Larry Morgan 12 Rob Taggart 2022-02-17 02:10:20 obs_completed ####################################################### # Group 3 # Construct your scripts beginning with "3_" ResetConfig() #resets all configuration parameters to defaults - clean start c=Catalog("wband_pointing") #catalog where the source is AutoOOF('0319+4130',None) #only specify name of source OR location, no need for both #autooof will know what receiver to use, in our case "Rcvr26_40" ####################################################### LOG SESSION NUMBER 1 [02:10:20] ******** Begin Scheduling Block [02:10:20] ******** observer = Larry Morgan, SB name = 3_OOF, project ID = TGBT22A_503, date = 17 Feb 2022 [02:10:20] *** Notice:Resetting the configuration. You must run another configuration before running a scan [02:10:21] Configuring telescope. [02:10:21] Setting State: Activating [02:10:30] Setting State: Ready [02:10:32] Setting State: Activating [02:10:33] Setting State: Ready [02:10:33] Default values are [02:10:33] swfreq = (0, 0) [02:10:33] swper = 0.2 [02:10:33] if3freq = [0, 0, 0, 0] [02:10:33] noisecal = lo-ext [02:10:33] xfer = thru [02:10:33] Configuring for backend CCB... [02:10:33] The bad devices are: [02:10:33] ConverterFilter14 [02:10:33] ConverterFilter2 [02:10:33] ConverterFilter16 [02:10:33] ConverterFilter10 [02:10:33] ConverterFilter12 [02:10:33] Data truncated for column 'Bandwidth' at row 1 [02:10:33] Waiting for IFRack to finish activating [02:10:33] . . Waiting for ScanCoordinator to finish activating [02:10:33] . . . . . . . [02:10:33] Checking telescope [02:10:33] Warning: Configuration complete but inconsistencies were found between the M&C system and the configuration tool. Verify the configuration [02:10:33] ('(manager, ', 'parameter, ', 'expected value, ', 'actual value )') [02:10:33] ('LO1', 'autoSetLOPowerLevel', '1', '0') [02:10:33] ('LO1', 'S4', '4', '2') [02:10:33] source : 0319+4130 [02:10:33] Slewing to source. [02:10:33] In state Ready, waiting for state Activating [02:10:33] Setting State: Activating [02:10:33] Detected state Activating [02:10:33] In state Activating, waiting for state Ready [02:11:30] Setting State: Ready [02:11:30] Detected state Ready [02:11:30] Balancing IF system. [02:11:30] Balancing IFRack [02:11:30] Setting State: Activating [02:11:30] Setting State: Ready [02:11:32] the sampler values are: [02:11:32] RF_power 1 : 0.01464844 [02:11:32] RF_power 2 : 0.01953125 [02:11:32] RF_power 3 : 0.004882812 [02:11:32] RF_power 4 : 0.02441406 [02:11:32] RF_power 5 : 0.02929688 [02:11:32] RF_power 6 : 0 [02:11:32] RF_power 7 : 0.004882812 [02:11:32] RF_power 8 : 0.02441406 [02:11:32] Running AutoOOF [02:11:33] Starting OOF map number, 1 at focus: 0.0 [02:11:33] Beginning execution of scan trajectory in file /home/gbt/etc/config//ka-19rows80.fits [02:11:33] Scan duration is 315.9 Moving to source [02:11:33] J2000 @ (03:19:48.16, 41:30:42.10) Starting trajectory [02:11:39] In state Ready, waiting for state Running [02:11:39] Setting State: Activating [02:11:43] Setting State: Committed [02:11:46] Setting State: Running [02:11:46] Detected state Running [02:11:46] *** Notice: This subscan will be numbered as scan #57 in your data reduction package. [02:11:46] In state Running, waiting for state Ready [02:17:00] Setting State: Stopping [02:17:03] Setting State: Ready [02:17:03] Detected state Ready [02:17:03] Ygor Telescope: WaitForStopping [02:17:03] Ending trajectory [02:17:03] Starting OOF map number, 2 at focus: 38.0 [02:17:03] Beginning execution of scan trajectory in file /home/gbt/etc/config//ka-19rows80.fits [02:17:03] Scan duration is 315.9 Moving to source [02:17:03] J2000 @ (03:19:48.16, 41:30:42.10) Starting trajectory [02:17:09] In state Ready, waiting for state Running [02:17:09] Setting State: Activating [02:17:15] Setting State: Committed [02:17:17] Setting State: Running [02:17:17] Detected state Running [02:17:17] *** Notice: This subscan will be numbered as scan #58 in your data reduction package. [02:17:17] In state Running, waiting for state Ready [02:22:32] Setting State: Stopping [02:22:35] Setting State: Ready [02:22:35] Detected state Ready [02:22:35] Ygor Telescope: WaitForStopping [02:22:35] Ending trajectory [02:22:35] Starting OOF map number, 3 at focus: -38.0 [02:22:35] Beginning execution of scan trajectory in file /home/gbt/etc/config//ka-19rows80.fits [02:22:35] Scan duration is 315.9 Moving to source [02:22:35] J2000 @ (03:19:48.16, 41:30:42.10) Starting trajectory [02:22:49] In state Ready, waiting for state Running [02:22:50] Setting State: Activating [02:22:59] Setting State: Committed [02:23:01] Setting State: Running [02:23:01] Detected state Running [02:23:01] *** Notice: This subscan will be numbered as scan #59 in your data reduction package. [02:23:01] In state Running, waiting for state Ready [02:28:16] Setting State: Stopping [02:28:19] Setting State: Ready [02:28:19] Detected state Ready [02:28:19] Ygor Telescope: WaitForStopping [02:28:19] Ending trajectory [02:28:19] Starting OOF data analysis. This will take a few minutes. [02:28:19] The surface will be displayed when the analysis is complete in the gfm OOF plugin. [02:28:19] After the surface is displayed, you may transfer a zernike solution using the 'Send Selected Solution' button in the gfm OOF plugin. [02:28:19] Running OOF command: [02:28:19] /home/oof/poof64/main/oofssh arcturus.gb.nrao.edu /home/gbtdata/TGBT22A_503_02 57 --channel=-1 --zmax=5 --nseq=3 --online --config=/home/gbt/etc/config --beamfind=None --mbacalseq=57 runSuccessful: True [02:28:20] ******** End Scheduling Block [02:28:20] ******** observer = Larry Morgan, SB name = 3_OOF, project ID = TGBT22A_503 how much log? 5291 id: 264651self.history: self.history.connection: how much converted log? 5528 ####################################################### ####################################################### SCRIPT NUMBER 2, project:TGBT22A_503_02 264652 93 Larry Morgan 12 Rob Taggart 2022-02-17 03:07:20 obs_aborted ####################################################### ResetConfig() NH3_FS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974, 24815.8772 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'sp' swtype = 'fsw' swfreq=-2.5,2.5 swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' NH3_PS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974, 24815.8772 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' catalog = """ format=spherical coordmode=J2000 veldef=VRAD-LSR HEAD = NAME RA DEC VEL W3_1 02:25:29.28 +62:06:16.0 -40.0 W3_2 02:28:11.16 +61:29:40.0 -40.0 W3_3 02:25:52.9 +62:04:17.0 -38.8 W3_4 02:28:01.9 +61:27:22.0 -48.6 """ Catalog(catalog) source = "W3_1" Slew(source) Configure(NH3_PS_config) Balance() OnOff(source, Offset('J2000', 1.0, 0.0, cosv=False), 60, '1') Nod(source, '3', '7', 60.0) Configure(NH3_FS_config) Balance() Track(source, None, 60.0) ####################################################### LOG SESSION NUMBER 2 [03:07:20] ******** Begin Scheduling Block [03:07:20] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503, date = 17 Feb 2022 [03:07:20] *** Notice:Resetting the configuration. You must run another configuration before running a scan [03:07:20] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:07:20] Slewing to source. [03:07:21] In state Ready, waiting for state Activating [03:07:21] Setting State: Activating [03:07:21] Detected state Activating [03:07:21] In state Activating, waiting for state Ready [03:08:38] Setting State: Ready [03:08:38] Detected state Ready [03:08:38] Configuring telescope. [03:08:38] Setting State: Activating [03:09:07] Setting State: Ready [03:09:07] Setting State: Activating [03:09:07] Setting State: Ready [03:09:09] Setting State: Activating [03:09:10] Default values are [03:09:10] dfreq = [0, 0, 0, 0, 0, 0] [03:09:10] swfreq = (0, 0) [03:09:10] if3freq = [0, 0, 0, 0, 0, 0] [03:09:10] polarization = Circular [03:09:10] Configuring for backend VEGAS... [03:09:10] The bad devices are: [03:09:10] ConverterFilter14 [03:09:10] ConverterFilter2 [03:09:10] ConverterFilter16 [03:09:10] ConverterFilter10 [03:09:10] ConverterFilter12 [03:09:10] The bad devices are: [03:09:10] ConverterFilter14 [03:09:10] ConverterFilter2 [03:09:10] ConverterFilter16 [03:09:10] ConverterFilter10 [03:09:10] ConverterFilter12 [03:09:10] Warning: Requested max frequency 24815.8772 exceeds observable freq (24731.8873) for beam 5, 6 or 7 [03:09:10] Waiting for IFRack to finish activating [03:09:10] . . Waiting for ScanCoordinator to finish activating [03:09:10] . . . . . . . . . . . . . . . . . . . . . . . . . . . [03:09:10] Finalizing VEGAS config... [03:09:10] Checking telescope [03:09:10] Configuration Complete [03:09:11] Balancing IF system. [03:09:12] Balancing IFRack [03:09:15] the sampler values are: [03:09:15] RF_power 1 : 8.320312 [03:09:15] RF_power 2 : 0.7714844 [03:09:15] RF_power 3 : 9.995117 [03:09:15] RF_power 4 : 1.142578 [03:09:15] RF_power 5 : 4.990234 [03:09:15] RF_power 6 : 4.506836 [03:09:15] RF_power 7 : 4.731445 [03:09:15] RF_power 8 : 2.055664 [03:09:15] Balancing VEGAS [03:09:29] ERROR: Balance command has failed [03:09:29] the following attenuators need further adjustment [03:09:29] ConverterRack CMAttenuator2 [03:09:29] ConverterRack CMAttenuator3 [03:09:29] ConverterRack CMAttenuator4 [03:09:29] ConverterRack CMAttenuator6 [03:09:29] ConverterRack CMAttenuator7 [03:09:29] ConverterRack CMAttenuator8 [03:09:29] ConverterRack CMAttenuator9 [03:09:29] ConverterRack CMAttenuator10 [03:09:29] ConverterRack CMAttenuator11 [03:09:29] ConverterRack CMAttenuator13 [03:09:29] ConverterRack CMAttenuator14 [03:09:29] ConverterRack CMAttenuator15 [03:09:36] Setting State: Ready [03:09:38] Setting State: Activating [03:09:38] Setting State: Ready [03:09:40] Setting State: Activating [03:09:40] Setting State: Ready [03:09:42] Setting State: Activating [03:09:42] Setting State: Ready [03:09:44] Setting State: Activating [03:09:44] Setting State: Ready [03:09:46] Setting State: Activating [03:09:46] Setting State: Ready [03:09:48] Setting State: Activating [03:09:48] Setting State: Ready [03:09:50] Setting State: Activating [03:09:50] Setting State: Ready [03:09:52] Setting State: Activating [03:09:52] Setting State: Ready [03:09:54] Setting State: Activating [03:09:55] Setting State: Ready [03:09:55] Setting State: Activating [03:09:55] Setting State: Ready [03:09:55] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:09:56] OnOff: Subscan 1 of 2 [03:10:01] In state Ready, waiting for state Running [03:10:02] Setting State: Activating [03:10:02] Setting State: Committed [03:10:07] Setting State: Running [03:10:07] Detected state Running [03:10:07] *** Notice: This subscan will be numbered as scan #60 in your data reduction package. [03:10:07] In state Running, waiting for state Ready [03:11:09] Setting State: Stopping [03:11:16] Setting State: Ready [03:11:16] Detected state Ready [03:11:16] Ygor Telescope: WaitForStopping [03:11:16] OnOff: Subscan 2 of 2 [03:11:17] In state Ready, waiting for state Running [03:11:17] Setting State: Activating [03:11:17] Setting State: Committed [03:11:27] Setting State: Running [03:11:27] Detected state Running [03:11:27] *** Notice: This subscan will be numbered as scan #61 in your data reduction package. [03:11:27] In state Running, waiting for state Ready [03:12:29] Setting State: Stopping [03:12:31] Setting State: Ready [03:12:31] Detected state Ready [03:12:31] Ygor Telescope: WaitForStopping [03:12:31] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:12:32] Nod: Subscan 1 of 2 [03:12:34] In state Ready, waiting for state Running [03:12:34] Setting State: Activating [03:12:35] Setting State: Committed [03:12:44] Setting State: Running [03:12:44] Detected state Running [03:12:44] *** Notice: This subscan will be numbered as scan #62 in your data reduction package. [03:12:44] In state Running, waiting for state Ready [03:13:46] Setting State: Stopping [03:13:48] Setting State: Ready [03:13:48] Detected state Ready [03:13:48] Ygor Telescope: WaitForStopping [03:13:48] Nod: Subscan 2 of 2 [03:13:49] In state Ready, waiting for state Running [03:13:49] Setting State: Activating [03:13:49] Setting State: Committed [03:13:54] Setting State: Running [03:13:54] Detected state Running [03:13:54] *** Notice: This subscan will be numbered as scan #63 in your data reduction package. [03:13:54] In state Running, waiting for state Ready [03:14:56] Setting State: Stopping [03:14:58] Setting State: Ready [03:14:58] Detected state Ready [03:14:58] Ygor Telescope: WaitForStopping [03:14:58] Configuring telescope. [03:14:58] Setting State: Activating [03:15:00] Setting State: Ready [03:15:01] Setting State: Activating [03:15:02] Setting State: Ready [03:15:02] Default values are [03:15:02] dfreq = [0, 0, 0, 0, 0, 0] [03:15:02] if3freq = [0, 0, 0, 0, 0, 0] [03:15:02] polarization = Circular [03:15:02] Configuring for backend VEGAS... [03:15:02] The bad devices are: [03:15:02] ConverterFilter14 [03:15:02] ConverterFilter2 [03:15:02] ConverterFilter16 [03:15:02] ConverterFilter10 [03:15:02] ConverterFilter12 [03:15:02] The bad devices are: [03:15:02] ConverterFilter14 [03:15:02] ConverterFilter2 [03:15:02] ConverterFilter16 [03:15:02] ConverterFilter10 [03:15:02] ConverterFilter12 [03:15:02] Warning: Requested max frequency 24815.8772 exceeds observable freq (24731.8873) for beam 5, 6 or 7 [03:15:02] Waiting for IFRack to finish activating [03:15:02] . . [03:15:02] Finalizing VEGAS config... [03:15:02] Checking telescope [03:15:02] Configuration Complete [03:15:03] Balancing IF system. [03:15:03] Balancing IFRack [03:15:04] Setting State: Activating [03:15:05] the sampler values are: [03:15:05] RF_power 1 : 4.750977 [03:15:05] RF_power 2 : 5.146484 [03:15:05] RF_power 3 : 5.917969 [03:15:05] RF_power 4 : 5.834961 [03:15:05] RF_power 5 : 5.288086 [03:15:05] RF_power 6 : 4.780273 [03:15:05] RF_power 7 : 5.3125 [03:15:05] RF_power 8 : 5.625 [03:15:05] Balancing VEGAS [03:15:05] Setting State: Ready [03:15:05] Setting State: Activating [03:15:05] Setting State: Ready [03:15:06] Setting State: Activating [03:15:06] Setting State: Ready [03:15:07] Setting State: Activating [03:15:07] Setting State: Ready [03:15:08] Setting State: Activating [03:15:08] Setting State: Ready [03:15:09] Setting State: Activating [03:15:09] Setting State: Ready [03:15:10] Setting State: Activating [03:15:10] Setting State: Ready [03:15:12] Setting State: Activating [03:15:12] Setting State: Ready [03:15:13] Setting State: Activating [03:15:13] Setting State: Ready [03:15:14] Setting State: Activating [03:15:14] Setting State: Ready [03:15:15] Setting State: Activating [03:15:15] Setting State: Ready [03:15:16] ERROR: Balance command has failed [03:15:16] the following attenuators need further adjustment [03:15:16] ConverterRack CMAttenuator3 [03:15:16] Setting State: Activating [03:15:17] Setting State: Ready [03:15:18] Setting State: Activating [03:15:18] Setting State: Ready [03:15:20] Setting State: Activating [03:15:20] Setting State: Ready [03:15:22] Setting State: Activating [03:15:22] Setting State: Ready [03:15:24] Setting State: Activating [03:15:25] Setting State: Ready [03:15:27] Setting State: Activating [03:15:27] Setting State: Ready [03:15:29] Setting State: Activating [03:15:29] Setting State: Ready [03:15:31] Setting State: Activating [03:15:31] Setting State: Ready [03:15:33] Setting State: Activating [03:15:33] Setting State: Ready [03:15:35] Setting State: Activating [03:15:35] Setting State: Ready [03:15:36] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:15:36] Track: Subscan 1 of 1 [03:15:37] In state Ready, waiting for state Running [03:15:38] Setting State: Activating [03:15:38] Setting State: Committed [03:15:43] Setting State: Running [03:15:43] Detected state Running [03:15:43] *** Notice: This subscan will be numbered as scan #64 in your data reduction package. [03:15:43] In state Running, waiting for state Ready [03:16:27] Setting State: Aborting [03:16:27] ygor.Telescope: RuntimeError msg: Abort detected! [03:16:27] ygor.Telescope: WaitForRunning: Asking abort confirmation. [03:16:27]  [03:16:27] User queried: "Abort detected! Terminate block?" waiting for reply... [03:16:28] Setting State: Ready [03:16:29] User replied: "Yes". [03:16:29] Exiting scheduling block. runSuccessful: False [03:16:29] ******** End Scheduling Block [03:16:29] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503 how much log? 10667 id: 264652self.history: self.history.connection: how much converted log? 10877 ####################################################### ####################################################### SCRIPT NUMBER 3, project:TGBT22A_503_02 264653 93 Larry Morgan 12 Rob Taggart 2022-02-17 03:18:06 obs_completed ####################################################### ResetConfig() NH3_FS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'sp' swtype = 'fsw' swfreq=-2.5,2.5 swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' NH3_PS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' catalog = """ format=spherical coordmode=J2000 veldef=VRAD-LSR HEAD = NAME RA DEC VEL W3_1 02:25:29.28 +62:06:16.0 -40.0 W3_2 02:28:11.16 +61:29:40.0 -40.0 W3_3 02:25:52.9 +62:04:17.0 -38.8 W3_4 02:28:01.9 +61:27:22.0 -48.6 """ Catalog(catalog) source = "W3_1" Slew(source) Configure(NH3_PS_config) Balance() Break() OnOff(source, Offset('J2000', 1.0, 0.0, cosv=False), 60, '1') Nod(source, '3', '7', 60.0) Configure(NH3_FS_config) Balance() Track(source, None, 60.0) ####################################################### LOG SESSION NUMBER 3 [03:18:06] ******** Begin Scheduling Block [03:18:06] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503, date = 17 Feb 2022 [03:18:06] *** Notice:Resetting the configuration. You must run another configuration before running a scan [03:18:06] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:18:06] Slewing to source. [03:18:07] In state Ready, waiting for state Activating [03:18:07] Setting State: Activating [03:18:07] Detected state Activating [03:18:07] In state Activating, waiting for state Ready [03:18:13] Setting State: Ready [03:18:13] Detected state Ready [03:18:13] Configuring telescope. [03:18:14] Setting State: Activating [03:18:16] Setting State: Ready [03:18:18] Setting State: Activating [03:18:19] Default values are [03:18:19] dfreq = [0, 0, 0, 0, 0] [03:18:19] swfreq = (0, 0) [03:18:19] if3freq = [0, 0, 0, 0, 0] [03:18:19] polarization = Circular [03:18:19] Configuring for backend VEGAS... [03:18:19] The bad devices are: [03:18:19] ConverterFilter14 [03:18:19] ConverterFilter2 [03:18:19] ConverterFilter16 [03:18:19] ConverterFilter10 [03:18:19] ConverterFilter12 [03:18:19] The bad devices are: [03:18:19] ConverterFilter14 [03:18:19] ConverterFilter2 [03:18:19] ConverterFilter16 [03:18:19] ConverterFilter10 [03:18:19] ConverterFilter12 [03:18:19] Waiting for IFRack to finish activating [03:18:19] . . . [03:18:19] Finalizing VEGAS config... [03:18:19] Checking telescope [03:18:19] Configuration Complete [03:18:19] Balancing IF system. [03:18:19] Balancing IFRack [03:18:21] the sampler values are: [03:18:21] RF_power 1 : 4.755859 [03:18:21] RF_power 2 : 5.322266 [03:18:21] RF_power 3 : 4.65332 [03:18:21] RF_power 4 : 4.863281 [03:18:21] RF_power 5 : 5.239258 [03:18:21] RF_power 6 : 4.443359 [03:18:22] RF_power 7 : 4.863281 [03:18:22] RF_power 8 : 5.107422 [03:18:22] Balancing VEGAS [03:18:22] Setting State: Ready [03:18:22] Setting State: Activating [03:18:22] Setting State: Ready [03:18:23] Setting State: Activating [03:18:23] Setting State: Ready [03:18:24] Setting State: Activating [03:18:24] Setting State: Ready [03:18:25] Setting State: Activating [03:18:25] Setting State: Ready [03:18:27] Setting State: Activating [03:18:27] Setting State: Ready [03:18:28] Setting State: Activating [03:18:28] Setting State: Ready [03:18:29] Setting State: Activating [03:18:29] Setting State: Ready [03:18:30] Setting State: Activating [03:18:30] Setting State: Ready [03:18:31] Setting State: Activating [03:18:31] Setting State: Ready [03:18:32] Setting State: Activating [03:18:32] Setting State: Ready [03:18:33] ERROR: Balance command has failed [03:18:33] the following attenuators need further adjustment [03:18:33] ConverterRack CMAttenuator3 [03:18:33] Setting State: Activating [03:18:34] Setting State: Ready [03:18:36] Setting State: Activating [03:18:36] Setting State: Ready [03:18:38] Setting State: Activating [03:18:38] Setting State: Ready [03:18:40] Setting State: Activating [03:18:40] Setting State: Ready [03:18:42] Setting State: Activating [03:18:42] Setting State: Ready [03:18:44] Setting State: Activating [03:18:44] Setting State: Ready [03:18:46] Setting State: Activating [03:18:46] Setting State: Ready [03:18:48] Setting State: Activating [03:18:48] Setting State: Ready [03:18:50] Setting State: Activating [03:18:50] Setting State: Ready [03:18:52] Setting State: Activating [03:18:52] Setting State: Ready [03:18:54] Setting State: Activating [03:18:55] Setting State: Ready [03:18:57] Setting State: Activating [03:18:57] Setting State: Ready [03:18:59] Setting State: Activating [03:18:59] Setting State: Ready [03:18:59] Setting State: Activating [03:18:59] Setting State: Ready [03:18:59]  [03:18:59] User queried: "Observation paused. - Continue scheduling block?" waiting for reply... [03:23:45] Setting State: Activating [03:23:45] Setting State: Ready [03:23:59] User replied: "Yes". [03:23:59] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:24:02] OnOff: Subscan 1 of 2 [03:24:03] In state Ready, waiting for state Running [03:24:03] Setting State: Activating [03:24:03] Setting State: Committed [03:24:08] Setting State: Running [03:24:08] Detected state Running [03:24:08] *** Notice: This subscan will be numbered as scan #65 in your data reduction package. [03:24:08] In state Running, waiting for state Ready [03:25:10] Setting State: Stopping [03:25:12] Setting State: Ready [03:25:12] Detected state Ready [03:25:12] Ygor Telescope: WaitForStopping [03:25:12] OnOff: Subscan 2 of 2 [03:25:13] In state Ready, waiting for state Running [03:25:13] Setting State: Activating [03:25:13] Setting State: Committed [03:25:23] Setting State: Running [03:25:23] Detected state Running [03:25:23] *** Notice: This subscan will be numbered as scan #66 in your data reduction package. [03:25:23] In state Running, waiting for state Ready [03:26:25] Setting State: Stopping [03:26:27] Setting State: Ready [03:26:27] Detected state Ready [03:26:27] Ygor Telescope: WaitForStopping [03:26:27] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:26:27] Nod: Subscan 1 of 2 [03:26:33] In state Ready, waiting for state Running [03:26:34] Setting State: Activating [03:26:34] Setting State: Committed [03:26:43] Setting State: Running [03:26:43] Detected state Running [03:26:43] *** Notice: This subscan will be numbered as scan #67 in your data reduction package. [03:26:43] In state Running, waiting for state Ready [03:27:45] Setting State: Stopping [03:27:47] Setting State: Ready [03:27:47] Detected state Ready [03:27:47] Ygor Telescope: WaitForStopping [03:27:47] Nod: Subscan 2 of 2 [03:27:48] In state Ready, waiting for state Running [03:27:48] Setting State: Activating [03:27:48] Setting State: Committed [03:27:53] Setting State: Running [03:27:53] Detected state Running [03:27:53] *** Notice: This subscan will be numbered as scan #68 in your data reduction package. [03:27:53] In state Running, waiting for state Ready [03:28:55] Setting State: Stopping [03:28:57] Setting State: Ready [03:28:57] Detected state Ready [03:28:57] Ygor Telescope: WaitForStopping [03:28:57] Configuring telescope. [03:28:57] Setting State: Activating [03:28:59] Setting State: Ready [03:29:00] Setting State: Activating [03:29:01] Setting State: Aborting [03:29:01] Setting State: Ready [03:29:02] Default values are [03:29:02] dfreq = [0, 0, 0, 0, 0] [03:29:02] if3freq = [0, 0, 0, 0, 0] [03:29:02] polarization = Circular [03:29:02] Configuring for backend VEGAS... [03:29:02] The bad devices are: [03:29:02] ConverterFilter14 [03:29:02] ConverterFilter2 [03:29:02] ConverterFilter16 [03:29:02] ConverterFilter10 [03:29:02] ConverterFilter12 [03:29:02] The bad devices are: [03:29:02] ConverterFilter14 [03:29:02] ConverterFilter2 [03:29:02] ConverterFilter16 [03:29:02] ConverterFilter10 [03:29:02] ConverterFilter12 [03:29:02] Waiting for IFRack to finish activating [03:29:02] . . [03:29:02] Finalizing VEGAS config... [03:29:02] Checking telescope [03:29:02] Configuration Complete [03:29:02] Balancing IF system. [03:29:02] Balancing IFRack [03:29:03] Setting State: Activating [03:29:04] the sampler values are: [03:29:04] RF_power 1 : 4.80957 [03:29:04] RF_power 2 : 4.833984 [03:29:04] Setting State: Ready[03:29:04] RF_power 3 : 4.829102 [03:29:04] RF_power 4 : 4.892578 [03:29:04] RF_power 5 : 5.688477 [03:29:04] RF_power 6 : 4.858398 [03:29:04] RF_power 7 : 5.024414 [03:29:04] RF_power 8 : 5.249023 [03:29:04] Balancing VEGAS [03:29:04] Setting State: Activating [03:29:05] Setting State: Ready [03:29:05] Setting State: Activating [03:29:06] Setting State: Ready [03:29:07] Setting State: Activating [03:29:07] Setting State: Ready [03:29:08] Setting State: Activating [03:29:08] Setting State: Ready [03:29:09] Setting State: Activating [03:29:09] Setting State: Ready [03:29:10] Setting State: Activating [03:29:10] Setting State: Ready [03:29:11] Setting State: Activating [03:29:11] Setting State: Ready [03:29:12] Setting State: Activating [03:29:12] Setting State: Ready [03:29:13] Setting State: Activating [03:29:13] Setting State: Ready [03:29:14] Setting State: Activating [03:29:14] Setting State: Ready [03:29:15] ERROR: Balance command has failed [03:29:15] the following attenuators need further adjustment [03:29:15] ConverterRack CMAttenuator3 [03:29:15] Setting State: Activating [03:29:16] Setting State: Ready [03:29:17] Setting State: Activating [03:29:18] Setting State: Ready [03:29:20] Setting State: Activating [03:29:20] Setting State: Ready [03:29:22] Setting State: Activating [03:29:22] Setting State: Ready [03:29:24] Setting State: Activating [03:29:24] Setting State: Ready [03:29:26] Setting State: Activating [03:29:26] Setting State: Ready [03:29:28] Setting State: Activating [03:29:28] Setting State: Ready [03:29:30] Setting State: Activating [03:29:30] Setting State: Ready [03:29:32] Setting State: Activating [03:29:32] Setting State: Ready [03:29:34] Setting State: Activating [03:29:34] Setting State: Ready [03:29:37] Setting State: Activating [03:29:37] Setting State: Ready [03:29:37] source : W3_1 veldef : VRAD-LSR location : J2000 @ (02:25:29.28, 62:06:16.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:29:38] Track: Subscan 1 of 1 [03:29:44] In state Ready, waiting for state Running [03:29:44] Setting State: Activating [03:29:44] Setting State: Committed [03:29:49] Setting State: Running [03:29:49] Detected state Running [03:29:49] *** Notice: This subscan will be numbered as scan #69 in your data reduction package. [03:29:49] In state Running, waiting for state Ready [03:30:51] Setting State: Stopping [03:30:53] Setting State: Ready [03:30:53] Detected state Ready [03:30:53] Ygor Telescope: WaitForStopping runSuccessful: True [03:30:53] ******** End Scheduling Block [03:30:53] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503 how much log? 11004 id: 264653self.history: self.history.connection: how much converted log? 11214 ####################################################### ####################################################### SCRIPT NUMBER 4, project:TGBT22A_503_02 264654 93 Larry Morgan 12 Rob Taggart 2022-02-17 03:30:55 obs_completed ####################################################### ResetConfig() NH3_FS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'sp' swtype = 'fsw' swfreq=-2.5,2.5 swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' NH3_PS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' catalog = """ format=spherical coordmode=J2000 veldef=VRAD-LSR HEAD = NAME RA DEC VEL W3_1 02:25:29.28 +62:06:16.0 -40.0 W3_2 02:28:11.16 +61:29:40.0 -40.0 W3_3 02:25:52.9 +62:04:17.0 -38.8 W3_4 02:28:01.9 +61:27:22.0 -48.6 """ Catalog(catalog) source = "W3_2" Slew(source) Configure(NH3_PS_config) Balance() Break() OnOff(source, Offset('J2000', 1.0, 0.0, cosv=False), 60, '1') Nod(source, '3', '7', 60.0) Configure(NH3_FS_config) Balance() Track(source, None, 60.0) ####################################################### LOG SESSION NUMBER 4 [03:30:55] ******** Begin Scheduling Block [03:30:55] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503, date = 17 Feb 2022 [03:30:55] *** Notice:Resetting the configuration. You must run another configuration before running a scan [03:30:55] source : W3_2 veldef : VRAD-LSR location : J2000 @ (02:28:11.16, 61:29:40.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:30:57] Slewing to source. [03:30:58] In state Ready, waiting for state Activating [03:30:58] Setting State: Activating [03:30:58] Detected state Activating [03:30:58] In state Activating, waiting for state Ready [03:31:10] Setting State: Ready [03:31:10] Detected state Ready [03:31:10] Configuring telescope. [03:31:11] Setting State: Activating [03:31:13] Setting State: Ready [03:31:14] Setting State: Activating [03:31:15] Setting State: Ready [03:31:15] Default values are [03:31:15] dfreq = [0, 0, 0, 0, 0] [03:31:15] swfreq = (0, 0) [03:31:15] if3freq = [0, 0, 0, 0, 0] [03:31:15] polarization = Circular [03:31:15] Configuring for backend VEGAS... [03:31:15] The bad devices are: [03:31:15] ConverterFilter14 [03:31:15] ConverterFilter2 [03:31:15] ConverterFilter16 [03:31:15] ConverterFilter10 [03:31:15] ConverterFilter12 [03:31:15] The bad devices are: [03:31:15] ConverterFilter14 [03:31:15] ConverterFilter2 [03:31:15] ConverterFilter16 [03:31:15] ConverterFilter10 [03:31:15] ConverterFilter12 [03:31:15] Waiting for IFRack to finish activating [03:31:15] . . [03:31:15] Finalizing VEGAS config... [03:31:15] Checking telescope [03:31:15] Configuration Complete [03:31:15] Balancing IF system. [03:31:15] Balancing IFRack [03:31:16] Setting State: Activating [03:31:17] Setting State: Ready [03:31:17] the sampler values are: [03:31:17] RF_power 1 : 5.776367 [03:31:17] RF_power 2 : 4.692383 [03:31:17] RF_power 3 : 5.048828 [03:31:17] RF_power 4 : 4.428711 [03:31:17] RF_power 5 : 5.175781 [03:31:17] RF_power 6 : 4.40918 [03:31:17] RF_power 7 : 4.84375 [03:31:17] RF_power 8 : 5.092773 [03:31:17] Balancing VEGAS [03:31:18] Setting State: Activating [03:31:18] Setting State: Ready [03:31:19] Setting State: Activating [03:31:19] Setting State: Ready [03:31:20] Setting State: Activating [03:31:20] Setting State: Ready [03:31:21] Setting State: Activating [03:31:21] Setting State: Ready [03:31:22] Setting State: Activating [03:31:22] Setting State: Ready [03:31:23] Setting State: Activating [03:31:23] Setting State: Ready [03:31:24] Setting State: Activating [03:31:24] Setting State: Ready [03:31:25] Setting State: Activating [03:31:25] Setting State: Ready [03:31:26] Setting State: Activating [03:31:26] Setting State: Ready [03:31:27] Setting State: Activating [03:31:27] Setting State: Ready [03:31:28] ERROR: Balance command has failed [03:31:28] the following attenuators need further adjustment [03:31:28] ConverterRack CMAttenuator3 [03:31:29] Setting State: Activating [03:31:29] Setting State: Ready [03:31:29]  [03:31:29] User queried: "Observation paused. - Continue scheduling block?" waiting for reply... [03:32:16] User replied: "Yes". [03:32:16] source : W3_2 veldef : VRAD-LSR location : J2000 @ (02:28:11.16, 61:29:40.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:32:16] OnOff: Subscan 1 of 2 [03:32:17] In state Ready, waiting for state Running [03:32:18] Setting State: Activating [03:32:18] Setting State: Committed [03:32:23] Setting State: Running [03:32:23] Detected state Running [03:32:23] *** Notice: This subscan will be numbered as scan #70 in your data reduction package. [03:32:23] In state Running, waiting for state Ready [03:33:25] Setting State: Stopping [03:33:27] Setting State: Ready [03:33:27] Detected state Ready [03:33:27] Ygor Telescope: WaitForStopping [03:33:27] OnOff: Subscan 2 of 2 [03:33:32] In state Ready, waiting for state Running [03:33:33] Setting State: Activating [03:33:33] Setting State: Committed [03:33:42] Setting State: Running [03:33:43] Detected state Running [03:33:43] *** Notice: This subscan will be numbered as scan #71 in your data reduction package. [03:33:43] In state Running, waiting for state Ready [03:34:44] Setting State: Stopping [03:34:46] Setting State: Ready [03:34:46] Detected state Ready [03:34:46] Ygor Telescope: WaitForStopping [03:34:46] source : W3_2 veldef : VRAD-LSR location : J2000 @ (02:28:11.16, 61:29:40.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:34:46] Nod: Subscan 1 of 2 [03:34:47] In state Ready, waiting for state Running [03:34:48] Setting State: Activating [03:34:48] Setting State: Committed [03:34:57] Setting State: Running [03:34:57] Detected state Running [03:34:57] *** Notice: This subscan will be numbered as scan #72 in your data reduction package. [03:34:57] In state Running, waiting for state Ready [03:35:59] Setting State: Stopping [03:36:02] Setting State: Ready [03:36:02] Detected state Ready [03:36:02] Ygor Telescope: WaitForStopping [03:36:02] Nod: Subscan 2 of 2 [03:36:02] In state Ready, waiting for state Running [03:36:03] Setting State: Activating [03:36:03] Setting State: Committed [03:36:11] Setting State: Running [03:36:11] Detected state Running [03:36:11] *** Notice: This subscan will be numbered as scan #73 in your data reduction package. [03:36:11] In state Running, waiting for state Ready [03:37:10] Setting State: Stopping [03:37:12] Setting State: Ready [03:37:12] Detected state Ready [03:37:12] Ygor Telescope: WaitForStopping [03:37:12] Configuring telescope. [03:37:13] Setting State: Activating [03:37:14] Setting State: Ready [03:37:16] Setting State: Activating [03:37:17] Setting State: Ready [03:37:17] Default values are [03:37:17] dfreq = [0, 0, 0, 0, 0] [03:37:17] if3freq = [0, 0, 0, 0, 0] [03:37:17] polarization = Circular [03:37:17] Configuring for backend VEGAS... [03:37:17] The bad devices are: [03:37:17] ConverterFilter14 [03:37:17] ConverterFilter2 [03:37:17] ConverterFilter16 [03:37:17] ConverterFilter10 [03:37:17] ConverterFilter12 [03:37:17] The bad devices are: [03:37:17] ConverterFilter14 [03:37:17] ConverterFilter2 [03:37:17] ConverterFilter16 [03:37:17] ConverterFilter10 [03:37:17] ConverterFilter12 [03:37:17] Waiting for IFRack to finish activating [03:37:17] . . [03:37:17] Finalizing VEGAS config... [03:37:17] Checking telescope [03:37:17] Configuration Complete [03:37:17] Balancing IF system. [03:37:17] Balancing IFRack [03:37:19] Setting State: Activating [03:37:19] the sampler values are: [03:37:19] RF_power 1 : 4.87793 [03:37:19] RF_power 2 : 5.214844 [03:37:19] RF_power 3 : 5.625 [03:37:19] RF_power 4 : 4.609375 [03:37:19] RF_power 5 : 4.404297 [03:37:19] RF_power 6 : 4.580078 [03:37:19] RF_power 7 : 5.068359 [03:37:19] RF_power 8 : 5.649414 [03:37:19] Balancing VEGAS [03:37:21] Setting State: Ready [03:37:21] Setting State: Activating [03:37:21] Setting State: Ready [03:37:22] Setting State: Activating [03:37:22] Setting State: Ready [03:37:23] Setting State: Activating [03:37:23] Setting State: Ready [03:37:24] Setting State: Activating [03:37:24] Setting State: Ready [03:37:25] Setting State: Activating [03:37:25] Setting State: Ready [03:37:27] Setting State: Activating [03:37:27] Setting State: Ready [03:37:28] Setting State: Activating [03:37:28] Setting State: Ready [03:37:29] Setting State: Activating [03:37:29] Setting State: Ready [03:37:30] Setting State: Activating [03:37:30] Setting State: Ready [03:37:31] ERROR: Balance command has failed [03:37:31] the following attenuators need further adjustment [03:37:31] ConverterRack CMAttenuator3 [03:37:31] Setting State: Activating [03:37:31] Setting State: Ready [03:37:32] source : W3_2 veldef : VRAD-LSR location : J2000 @ (02:28:11.16, 61:29:40.00) velocitydefinition : Radio VEL : -40.0 restframe : KinematicalLSR [03:37:33] Track: Subscan 1 of 1 [03:37:34] In state Ready, waiting for state Running [03:37:34] Setting State: Activating [03:37:35] Setting State: Committed [03:37:49] Setting State: Running [03:37:49] Detected state Running [03:37:49] *** Notice: This subscan will be numbered as scan #74 in your data reduction package. [03:37:49] In state Running, waiting for state Ready [03:38:51] Setting State: Stopping [03:38:53] Setting State: Ready [03:38:53] Detected state Ready [03:38:53] Ygor Telescope: WaitForStopping runSuccessful: True [03:38:53] ******** End Scheduling Block [03:38:53] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503 how much log? 9111 id: 264654self.history: self.history.connection: how much converted log? 9320 ####################################################### ####################################################### SCRIPT NUMBER 5, project:TGBT22A_503_02 264655 93 Larry Morgan 12 Rob Taggart 2022-02-17 03:38:55 obs_completed ####################################################### ResetConfig() NH3_FS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'sp' swtype = 'fsw' swfreq=-2.5,2.5 swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' NH3_PS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' catalog = """ format=spherical coordmode=J2000 veldef=VRAD-LSR HEAD = NAME RA DEC VEL W3_1 02:25:29.28 +62:06:16.0 -40.0 W3_2 02:28:11.16 +61:29:40.0 -40.0 W3_3 02:25:52.9 +62:04:17.0 -38.8 W3_4 02:28:01.9 +61:27:22.0 -48.6 """ Catalog(catalog) source = "W3_3" Slew(source) Configure(NH3_PS_config) Balance() #Break() OnOff(source, Offset('J2000', 1.0, 0.0, cosv=False), 60, '1') Nod(source, '3', '7', 60.0) Configure(NH3_FS_config) Balance() Track(source, None, 60.0) ####################################################### LOG SESSION NUMBER 5 [03:38:55] ******** Begin Scheduling Block [03:38:55] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503, date = 17 Feb 2022 [03:38:55] *** Notice:Resetting the configuration. You must run another configuration before running a scan [03:38:55] source : W3_3 veldef : VRAD-LSR location : J2000 @ (02:25:52.90, 62:04:17.00) velocitydefinition : Radio VEL : -38.8 restframe : KinematicalLSR [03:38:56] Slewing to source. [03:38:56] In state Ready, waiting for state Activating [03:38:56] Setting State: Activating [03:38:56] Detected state Activating [03:38:56] In state Activating, waiting for state Ready [03:39:08] Setting State: Ready [03:39:08] Detected state Ready [03:39:09] Configuring telescope. [03:39:10] Setting State: Activating [03:39:12] Setting State: Ready [03:39:14] Setting State: Activating [03:39:15] Setting State: Ready [03:39:15] Default values are [03:39:15] dfreq = [0, 0, 0, 0, 0] [03:39:15] swfreq = (0, 0) [03:39:15] if3freq = [0, 0, 0, 0, 0] [03:39:15] polarization = Circular [03:39:15] Configuring for backend VEGAS... [03:39:15] The bad devices are: [03:39:15] ConverterFilter14 [03:39:15] ConverterFilter2 [03:39:15] ConverterFilter16 [03:39:15] ConverterFilter10 [03:39:15] ConverterFilter12 [03:39:15] The bad devices are: [03:39:15] ConverterFilter14 [03:39:15] ConverterFilter2 [03:39:15] ConverterFilter16 [03:39:15] ConverterFilter10 [03:39:15] ConverterFilter12 [03:39:16] Waiting for IFRack to finish activating [03:39:16] . . . [03:39:16] Finalizing VEGAS config... [03:39:16] Checking telescope [03:39:16] Configuration Complete [03:39:16] Balancing IF system. [03:39:16] Balancing IFRack [03:39:17] Setting State: Activating [03:39:18] the sampler values are: [03:39:18] RF_power 1 : 4.702148 [03:39:18] RF_power 2 : 5.03418 [03:39:18] RF_power 3 : 4.594727 [03:39:18] RF_power 4 : 4.731445 [03:39:18] RF_power 5 : 4.526367 [03:39:18] RF_power 6 : 4.707031 [03:39:18] RF_power 7 : 5.229492 [03:39:18] RF_power 8 : 5.424805 [03:39:18] Balancing VEGAS [03:39:18] Setting State: Ready [03:39:18] Setting State: Activating [03:39:19] Setting State: Ready [03:39:20] Setting State: Activating [03:39:20] Setting State: Ready [03:39:21] Setting State: Activating [03:39:21] Setting State: Ready [03:39:22] Setting State: Activating [03:39:22] Setting State: Ready [03:39:23] Setting State: Activating [03:39:23] Setting State: Ready [03:39:24] Setting State: Activating [03:39:24] Setting State: Ready [03:39:25] Setting State: Activating [03:39:25] Setting State: Ready [03:39:26] Setting State: Activating [03:39:26] Setting State: Ready [03:39:27] Setting State: Activating [03:39:27] Setting State: Ready [03:39:28] Setting State: Activating [03:39:28] Setting State: Ready [03:39:29] ERROR: Balance command has failed [03:39:29] the following attenuators need further adjustment [03:39:29] ConverterRack CMAttenuator3 [03:39:30] Setting State: Activating [03:39:30] Setting State: Ready [03:39:32] Setting State: Activating [03:39:32] Setting State: Ready [03:39:34] Setting State: Activating [03:39:34] Setting State: Ready [03:39:36] Setting State: Activating [03:39:36] Setting State: Ready [03:39:37] source : W3_3 veldef : VRAD-LSR location : J2000 @ (02:25:52.90, 62:04:17.00) velocitydefinition : Radio VEL : -38.8 restframe : KinematicalLSR [03:39:37] OnOff: Subscan 1 of 2 [03:39:38] In state Ready, waiting for state Running [03:39:39] Setting State: Activating [03:39:39] Setting State: Committed [03:39:48] Setting State: Running [03:39:48] Detected state Running [03:39:48] *** Notice: This subscan will be numbered as scan #75 in your data reduction package. [03:39:48] In state Running, waiting for state Ready [03:40:49] Setting State: Stopping [03:40:51] Setting State: Ready [03:40:51] Detected state Ready [03:40:51] Ygor Telescope: WaitForStopping [03:40:51] OnOff: Subscan 2 of 2 [03:40:52] In state Ready, waiting for state Running [03:40:52] Setting State: Activating [03:40:52] Setting State: Committed [03:41:02] Setting State: Running [03:41:02] Detected state Running [03:41:02] *** Notice: This subscan will be numbered as scan #76 in your data reduction package. [03:41:02] In state Running, waiting for state Ready [03:42:04] Setting State: Stopping [03:42:06] Setting State: Ready [03:42:06] Detected state Ready [03:42:06] Ygor Telescope: WaitForStopping [03:42:06] source : W3_3 veldef : VRAD-LSR location : J2000 @ (02:25:52.90, 62:04:17.00) velocitydefinition : Radio VEL : -38.8 restframe : KinematicalLSR [03:42:07] Nod: Subscan 1 of 2 [03:42:07] In state Ready, waiting for state Running [03:42:08] Setting State: Activating [03:42:08] Setting State: Committed [03:42:17] Setting State: Running [03:42:17] Detected state Running [03:42:17] *** Notice: This subscan will be numbered as scan #77 in your data reduction package. [03:42:17] In state Running, waiting for state Ready [03:43:19] Setting State: Stopping [03:43:21] Setting State: Ready [03:43:21] Detected state Ready [03:43:21] Ygor Telescope: WaitForStopping [03:43:21] Nod: Subscan 2 of 2 [03:43:22] In state Ready, waiting for state Running [03:43:22] Setting State: Activating [03:43:22] Setting State: Committed [03:43:27] Setting State: Running [03:43:27] Detected state Running [03:43:27] *** Notice: This subscan will be numbered as scan #78 in your data reduction package. [03:43:27] In state Running, waiting for state Ready [03:44:29] Setting State: Stopping [03:44:31] Setting State: Ready [03:44:31] Detected state Ready [03:44:31] Ygor Telescope: WaitForStopping [03:44:31] Configuring telescope. [03:44:31] Setting State: Activating [03:44:33] Setting State: Ready [03:44:35] Setting State: Activating [03:44:36] Setting State: Ready [03:44:36] Default values are [03:44:36] dfreq = [0, 0, 0, 0, 0] [03:44:36] if3freq = [0, 0, 0, 0, 0] [03:44:36] polarization = Circular [03:44:36] Configuring for backend VEGAS... [03:44:36] The bad devices are: [03:44:36] ConverterFilter14 [03:44:36] ConverterFilter2 [03:44:36] ConverterFilter16 [03:44:36] ConverterFilter10 [03:44:36] ConverterFilter12 [03:44:36] The bad devices are: [03:44:36] ConverterFilter14 [03:44:36] ConverterFilter2 [03:44:36] ConverterFilter16 [03:44:36] ConverterFilter10 [03:44:36] ConverterFilter12 [03:44:36] Waiting for ActiveSurface to finish activating [03:44:36] . . [03:44:36] Finalizing VEGAS config... [03:44:36] Checking telescope [03:44:36] Configuration Complete [03:44:36] Balancing IF system. [03:44:36] Balancing IFRack [03:44:37] Setting State: Activating [03:44:38] the sampler values are: [03:44:38] RF_power 1 : 5.03418 [03:44:38] RF_power 2 : 5.400391 [03:44:38] RF_power 3 : 4.951172 [03:44:38] RF_power 4 : 5.102539 [03:44:38] RF_power 5 : 4.833984 [03:44:38] RF_power 6 : 5.224609 [03:44:38] RF_power 7 : 5.581055 [03:44:38] RF_power 8 : 6.010742 [03:44:38] Balancing VEGAS [03:44:39] Setting State: Ready [03:44:40] Setting State: Activating [03:44:40] Setting State: Ready [03:44:41] Setting State: Activating [03:44:41] Setting State: Ready [03:44:42] Setting State: Activating [03:44:42] Setting State: Ready [03:44:43] Setting State: Activating [03:44:43] Setting State: Ready [03:44:47] Setting State: Activating [03:44:47] Setting State: Ready [03:44:48] Setting State: Activating [03:44:48] Setting State: Ready [03:44:49] Setting State: Activating [03:44:49] Setting State: Ready [03:44:50] Setting State: Activating [03:44:50] Setting State: Ready [03:44:51] Setting State: Activating [03:44:52] Setting State: Ready [03:44:52] ERROR: Balance command has failed [03:44:52] the following attenuators need further adjustment [03:44:52] ConverterRack CMAttenuator3 [03:44:53] Setting State: Activating [03:44:53] Setting State: Ready [03:44:55] Setting State: Activating [03:44:55] Setting State: Ready [03:44:57] Setting State: Activating [03:44:57] Setting State: Ready [03:44:59] Setting State: Activating [03:44:59] Setting State: Ready [03:45:01] Setting State: Activating [03:45:01] Setting State: Ready [03:45:03] Setting State: Activating [03:45:03] Setting State: Ready [03:45:05] Setting State: Activating [03:45:05] Setting State: Ready [03:45:07] Setting State: Activating [03:45:08] Setting State: Ready [03:45:10] Setting State: Activating [03:45:10] Setting State: Ready [03:45:10] source : W3_3 veldef : VRAD-LSR location : J2000 @ (02:25:52.90, 62:04:17.00) velocitydefinition : Radio VEL : -38.8 restframe : KinematicalLSR [03:45:11] Track: Subscan 1 of 1 [03:45:12] In state Ready, waiting for state Running [03:45:12] Setting State: Activating [03:45:12] Setting State: Committed [03:45:17] Setting State: Running [03:45:17] Detected state Running [03:45:17] *** Notice: This subscan will be numbered as scan #79 in your data reduction package. [03:45:17] In state Running, waiting for state Ready [03:46:19] Setting State: Stopping [03:46:21] Setting State: Ready [03:46:21] Detected state Ready [03:46:21] Ygor Telescope: WaitForStopping runSuccessful: True [03:46:21] ******** End Scheduling Block [03:46:21] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503 how much log? 9829 id: 264655self.history: self.history.connection: how much converted log? 10038 ####################################################### ####################################################### SCRIPT NUMBER 6, project:TGBT22A_503_02 264656 93 Larry Morgan 12 Rob Taggart 2022-02-17 03:47:43 obs_completed ####################################################### ResetConfig() NH3_FS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'sp' swtype = 'fsw' swfreq=-2.5,2.5 swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' NH3_PS_config =''' receiver = 'RcvrArray18_26' beam='1,2,3,4,5,6,7' obstype = 'Spectroscopy' restfreq = 23694.4955, 23722.6336, 23870.1296, 23963.9010, 23687.8974 backend = 'VEGAS' bandwidth = 23.44 nchan = 32768 swmode = 'tp' swtype = 'none' swper = 1. tint = 2.0 vframe = 'lsrk' vdef = 'Radio' noisecal = 'lo' ''' catalog = """ format=spherical coordmode=J2000 veldef=VRAD-LSR HEAD = NAME RA DEC VEL W3_1 02:25:29.28 +62:06:16.0 -40.0 W3_2 02:28:11.16 +61:29:40.0 -40.0 W3_3 02:25:52.9 +62:04:17.0 -38.8 W3_4 02:28:01.9 +61:27:22.0 -48.6 """ Catalog(catalog) source = "W3_4" Slew(source) Configure(NH3_PS_config) Balance() #Break() OnOff(source, Offset('J2000', 1.0, 0.0, cosv=False), 60, '1') Nod(source, '3', '7', 60.0) Configure(NH3_FS_config) Balance() Track(source, None, 60.0) ####################################################### LOG SESSION NUMBER 6 [03:47:43] ******** Begin Scheduling Block [03:47:43] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503, date = 17 Feb 2022 [03:47:43] *** Notice:Resetting the configuration. You must run another configuration before running a scan [03:47:43] source : W3_4 veldef : VRAD-LSR location : J2000 @ (02:28:01.90, 61:27:22.00) velocitydefinition : Radio VEL : -48.6 restframe : KinematicalLSR [03:47:43] Slewing to source. [03:47:44] In state Ready, waiting for state Activating [03:47:44] Setting State: Activating [03:47:44] Detected state Activating [03:47:44] In state Activating, waiting for state Ready [03:47:56] Setting State: Ready [03:47:56] Detected state Ready [03:47:56] Configuring telescope. [03:47:56] Setting State: Activating [03:47:58] Setting State: Ready [03:48:00] Setting State: Activating [03:48:01] Setting State: Ready [03:48:06] Default values are [03:48:06] dfreq = [0, 0, 0, 0, 0] [03:48:06] swfreq = (0, 0) [03:48:06] if3freq = [0, 0, 0, 0, 0] [03:48:06] polarization = Circular [03:48:06] Configuring for backend VEGAS... [03:48:06] The bad devices are: [03:48:06] ConverterFilter14 [03:48:06] ConverterFilter2 [03:48:06] ConverterFilter16 [03:48:06] ConverterFilter10 [03:48:06] ConverterFilter12 [03:48:06] The bad devices are: [03:48:06] ConverterFilter14 [03:48:06] ConverterFilter2 [03:48:06] ConverterFilter16 [03:48:06] ConverterFilter10 [03:48:06] ConverterFilter12 [03:48:06] Waiting for ActiveSurface to finish activating [03:48:06] . . [03:48:06] Finalizing VEGAS config... [03:48:06] Checking telescope [03:48:06] Configuration Complete [03:48:06] Balancing IF system. [03:48:06] Balancing IFRack [03:48:07] Setting State: Activating [03:48:08] Setting State: Ready [03:48:08] the sampler values are: [03:48:08] RF_power 1 : 5.039062 [03:48:08] RF_power 2 : 5.449219 [03:48:08] RF_power 3 : 4.960938 [03:48:08] RF_power 4 : 5.141602 [03:48:08] RF_power 5 : 4.926758 [03:48:08] RF_power 6 : 5.087891 [03:48:08] RF_power 7 : 4.799805 [03:48:08] RF_power 8 : 4.521484 [03:48:08] Balancing VEGAS [03:48:09] Setting State: Activating [03:48:09] Setting State: Ready [03:48:10] Setting State: Activating [03:48:10] Setting State: Ready [03:48:11] Setting State: Activating [03:48:11] Setting State: Ready [03:48:12] Setting State: Activating [03:48:12] Setting State: Ready [03:48:13] Setting State: Activating [03:48:13] Setting State: Ready [03:48:14] Setting State: Activating [03:48:14] Setting State: Ready [03:48:15] Setting State: Activating [03:48:15] Setting State: Ready [03:48:16] Setting State: Activating [03:48:16] Setting State: Ready [03:48:17] Setting State: Activating [03:48:17] Setting State: Ready [03:48:19] Setting State: Activating [03:48:19] Setting State: Ready [03:48:19] ERROR: Balance command has failed [03:48:20] the following attenuators need further adjustment [03:48:20] ConverterRack CMAttenuator3 [03:48:20] Setting State: Activating [03:48:20] Setting State: Ready [03:48:22] Setting State: Activating [03:48:22] Setting State: Ready [03:48:24] Setting State: Activating [03:48:24] Setting State: Ready [03:48:26] Setting State: Activating [03:48:26] Setting State: Ready [03:48:28] Setting State: Activating [03:48:28] Setting State: Ready [03:48:29] source : W3_4 veldef : VRAD-LSR location : J2000 @ (02:28:01.90, 61:27:22.00) velocitydefinition : Radio VEL : -48.6 restframe : KinematicalLSR [03:48:30] OnOff: Subscan 1 of 2 [03:48:31] In state Ready, waiting for state Running [03:48:31] Setting State: Activating [03:48:31] Setting State: Committed [03:48:37] Setting State: Running [03:48:37] Detected state Running [03:48:37] *** Notice: This subscan will be numbered as scan #80 in your data reduction package. [03:48:37] In state Running, waiting for state Ready [03:49:39] Setting State: Stopping [03:49:41] Setting State: Ready [03:49:41] Detected state Ready [03:49:41] Ygor Telescope: WaitForStopping [03:49:41] OnOff: Subscan 2 of 2 [03:49:42] In state Ready, waiting for state Running [03:49:42] Setting State: Activating [03:49:42] Setting State: Committed [03:49:52] Setting State: Running [03:49:52] Detected state Running [03:49:52] *** Notice: This subscan will be numbered as scan #81 in your data reduction package. [03:49:52] In state Running, waiting for state Ready [03:50:54] Setting State: Stopping [03:50:56] Setting State: Ready [03:50:56] Detected state Ready [03:50:56] Ygor Telescope: WaitForStopping [03:50:56] source : W3_4 veldef : VRAD-LSR location : J2000 @ (02:28:01.90, 61:27:22.00) velocitydefinition : Radio VEL : -48.6 restframe : KinematicalLSR [03:50:56] Nod: Subscan 1 of 2 [03:50:57] In state Ready, waiting for state Running [03:50:58] Setting State: Activating [03:50:58] Setting State: Committed [03:51:07] Setting State: Running [03:51:07] Detected state Running [03:51:07] *** Notice: This subscan will be numbered as scan #82 in your data reduction package. [03:51:07] In state Running, waiting for state Ready [03:52:09] Setting State: Stopping [03:52:11] Setting State: Ready [03:52:11] Detected state Ready [03:52:11] Ygor Telescope: WaitForStopping [03:52:11] Nod: Subscan 2 of 2 [03:52:11] In state Ready, waiting for state Running [03:52:12] Setting State: Activating [03:52:12] Setting State: Committed [03:52:17] Setting State: Running [03:52:17] Detected state Running [03:52:17] *** Notice: This subscan will be numbered as scan #83 in your data reduction package. [03:52:17] In state Running, waiting for state Ready [03:53:19] Setting State: Stopping [03:53:21] Setting State: Ready [03:53:21] Detected state Ready [03:53:21] Ygor Telescope: WaitForStopping [03:53:21] Configuring telescope. [03:53:22] Setting State: Activating [03:53:24] Setting State: Ready [03:53:25] Setting State: Activating [03:53:26] Setting State: Ready [03:53:26] Default values are [03:53:26] dfreq = [0, 0, 0, 0, 0] [03:53:26] if3freq = [0, 0, 0, 0, 0] [03:53:26] polarization = Circular [03:53:26] Configuring for backend VEGAS... [03:53:26] The bad devices are: [03:53:26] ConverterFilter14 [03:53:26] ConverterFilter2 [03:53:26] ConverterFilter16 [03:53:26] ConverterFilter10 [03:53:26] ConverterFilter12 [03:53:26] The bad devices are: [03:53:26] ConverterFilter14 [03:53:26] ConverterFilter2 [03:53:26] ConverterFilter16 [03:53:26] ConverterFilter10 [03:53:26] ConverterFilter12 [03:53:26] Waiting for IFRack to finish activating [03:53:26] . . [03:53:26] Finalizing VEGAS config... [03:53:26] Checking telescope [03:53:26] Configuration Complete [03:53:31] Balancing IF system. [03:53:32] Balancing IFRack [03:53:33] Setting State: Activating [03:53:33] Setting State: Ready [03:53:34] the sampler values are: [03:53:34] RF_power 1 : 5.092773 [03:53:34] RF_power 2 : 5.454102 [03:53:34] RF_power 3 : 4.995117 [03:53:34] RF_power 4 : 5.151367 [03:53:34] RF_power 5 : 4.619141 [03:53:34] RF_power 6 : 4.790039 [03:53:34] RF_power 7 : 4.511719 [03:53:34] RF_power 8 : 5.537109 [03:53:34] Balancing VEGAS [03:53:34] Setting State: Activating [03:53:34] Setting State: Ready [03:53:35] Setting State: Activating [03:53:35] Setting State: Ready [03:53:36] Setting State: Activating [03:53:36] Setting State: Ready [03:53:38] Setting State: Activating [03:53:38] Setting State: Ready [03:53:39] Setting State: Activating [03:53:39] Setting State: Ready [03:53:40] Setting State: Activating [03:53:40] Setting State: Ready [03:53:41] Setting State: Activating [03:53:42] Setting State: Ready [03:53:43] Setting State: Activating [03:53:43] Setting State: Ready [03:53:44] Setting State: Activating [03:53:44] Setting State: Ready [03:53:45] Setting State: Activating [03:53:45] Setting State: Ready [03:53:46] ERROR: Balance command has failed [03:53:46] the following attenuators need further adjustment [03:53:46] ConverterRack CMAttenuator3 [03:53:46] Setting State: Activating [03:53:46] Setting State: Ready [03:53:47] source : W3_4 veldef : VRAD-LSR location : J2000 @ (02:28:01.90, 61:27:22.00) velocitydefinition : Radio VEL : -48.6 restframe : KinematicalLSR [03:53:47] Track: Subscan 1 of 1 [03:53:48] In state Ready, waiting for state Running [03:53:49] Setting State: Activating [03:53:49] Setting State: Committed [03:54:02] Setting State: Running [03:54:02] Detected state Running [03:54:02] *** Notice: This subscan will be numbered as scan #84 in your data reduction package. [03:54:02] In state Running, waiting for state Ready [03:55:04] Setting State: Stopping [03:55:06] Setting State: Ready [03:55:06] Detected state Ready [03:55:06] Ygor Telescope: WaitForStopping runSuccessful: True [03:55:06] ******** End Scheduling Block [03:55:06] ******** observer = Larry Morgan, SB name = 3_Observe, project ID = TGBT22A_503 how much log? 9367 id: 264656self.history: self.history.connection: how much converted log? 9576 ####################################################### ####################################################### SCRIPT NUMBER 7, project:TGBT22A_503_02 264657 231 Ryan Lynch 12 Rob Taggart 2022-02-17 04:03:04 obs_aborted ####################################################### # Group 4 # Construct your scripts beginning with "4_ak" psrs1 = Catalog(pulsars_brightest_GBT) psrs2 = Catalog(pulsars_bright_MSPs_GBT) source = "B0329+54" scan_length = 600.0 config_vpm_single= """ obstype = 'Pulsar' receiver = 'Rcvr1_2' restfreq = 1500.0 nwin = 1 pol = 'Linear' backend = 'VEGAS' bandwidth = 800.0 tint = 40.96e-6 deltafreq = 0.0 swmode = 'tp_nocal' swtype = 'none' swper = 0.04 swfreq = 0 noisecal = 'off' vlow = 0.0 vhigh = 0.0 vframe = 'topo' vdef = 'Radio' vegas.obsmode = 'search' vegas.polnmode = 'total_intensity' vegas.numchan = 2048 vegas.scale = 13000 vegas.outbits = 8 vegas.fold_bins = 256 vegas.fold_dumptime = 10.0 vegas.fold_parfile = '/home/gpu/tzpar/B1937+21.par' vegas.dm = 0.0 """ Configure(config_vpm_single) Slew(source) Balance() Track(source,None,scan_length) ####################################################### LOG SESSION NUMBER 7 [04:03:04] ******** Begin Scheduling Block [04:03:04] ******** observer = Ryan Lynch, SB name = 4_example_ak_1, project ID = TGBT22A_503, date = 17 Feb 2022 [04:03:04] Configuring telescope. [04:03:04] Warning: nchan and numchan are set differently.Using numchan = 2048 [04:03:04] ERROR: This receiver only has one feed: the metakeyword 'beam' must be set to 'B1' or '1' [04:03:04] "ERROR: This receiver only has one feed: the metakeyword 'beam' must be set to 'B1' or '1'" [04:03:04] Default values are [04:03:04] notchfilter = In [04:03:04] polswitch = thru [04:03:04] Please fix configuration, then try again [04:03:04] *** Configuration failed! [04:03:04]  [04:03:04] User queried: "Configuration failed! Terminate block?" waiting for reply... [04:04:04] User replied: "Yes". [04:04:04] Exiting scheduling block. runSuccessful: False [04:04:04] ******** End Scheduling Block [04:04:04] ******** observer = Ryan Lynch, SB name = 4_example_ak_1, project ID = TGBT22A_503 how much log? 980 id: 264657self.history: self.history.connection: how much converted log? 1200 ####################################################### ####################################################### SCRIPT NUMBER 8, project:TGBT22A_503_02 264658 231 Ryan Lynch 12 Rob Taggart 2022-02-17 04:04:46 obs_completed ####################################################### ResetConfig() ####################################################### LOG SESSION NUMBER 8 [04:04:46] ******** Begin Scheduling Block [04:04:46] ******** observer = Ryan Lynch, SB name = ResetConfig, project ID = TGBT22A_503, date = 17 Feb 2022 [04:04:46] *** Notice:Resetting the configuration. You must run another configuration before running a scan runSuccessful: True [04:04:46] ******** End Scheduling Block [04:04:46] ******** observer = Ryan Lynch, SB name = ResetConfig, project ID = TGBT22A_503 how much log? 416 id: 264658self.history: self.history.connection: how much converted log? 624 ####################################################### ####################################################### SCRIPT NUMBER 9, project:TGBT22A_503_02 264659 231 Ryan Lynch 12 Rob Taggart 2022-02-17 04:05:03 obs_completed ####################################################### # Group 4 # Construct your scripts beginning with "4_ak" psrs1 = Catalog(pulsars_brightest_GBT) psrs2 = Catalog(pulsars_bright_MSPs_GBT) source = "B0329+54" scan_length = 600.0 config_vpm_single= """ obstype = 'Pulsar' receiver = 'Rcvr1_2' restfreq = 1500.0 nwin = 1 pol = 'Linear' backend = 'VEGAS' bandwidth = 800.0 tint = 40.96e-6 deltafreq = 0.0 swmode = 'tp_nocal' swtype = 'none' swper = 0.04 swfreq = 0 noisecal = 'off' vlow = 0.0 vhigh = 0.0 vframe = 'topo' vdef = 'Radio' vegas.obsmode = 'search' vegas.polnmode = 'total_intensity' vegas.numchan = 2048 vegas.scale = 13000 vegas.outbits = 8 vegas.fold_bins = 256 vegas.fold_dumptime = 10.0 vegas.fold_parfile = '/home/gpu/tzpar/B1937+21.par' vegas.dm = 0.0 """ Configure(config_vpm_single) Slew(source) Balance() Track(source,None,scan_length) ####################################################### LOG SESSION NUMBER 9 [04:05:03] ******** Begin Scheduling Block [04:05:03] ******** observer = Ryan Lynch, SB name = 4_example_ak_1, project ID = TGBT22A_503, date = 17 Feb 2022 [04:05:03] Configuring telescope. [04:05:03] Setting State: Activating [04:05:31] Setting State: Ready [04:05:32] Setting State: Activating [04:05:33] Setting State: Ready [04:05:33] Setting State: Activating [04:05:33] Setting State: Ready [04:05:34] Warning: (Data generated using this configuration can NOT be reduced using GBTIDL. If GBTIDL is required, change the integration time(s) to a integral number of switch periods. [04:05:34] DEBUG: tint (0.000041 s) bandwidth (800.000000 MHz) numchan (2048) acclen=15.000000 [04:05:34] Default values are [04:05:34] nchan = 2048 [04:05:34] beam = B1 [04:05:34] if3freq = [0] [04:05:34] subband = 1 [04:05:34] notchfilter = In [04:05:34] polswitch = thru [04:05:34] Configuring for backend VEGAS... [04:05:34] The bad devices are: [04:05:34] ConverterFilter14 [04:05:34] ConverterFilter2 [04:05:34] ConverterFilter16 [04:05:34] ConverterFilter10 [04:05:34] ConverterFilter12 [04:05:34] The bad devices are: [04:05:34] ConverterFilter14 [04:05:34] ConverterFilter2 [04:05:34] ConverterFilter16 [04:05:34] ConverterFilter10 [04:05:34] ConverterFilter12 [04:05:34] Warning: Total bandwidth is greater than any receiver filter available: Setting receiver filter to maximum [04:05:34] Waiting for IFRack to finish activating [04:05:34] . . Waiting for ScanCoordinator to finish activating [04:05:34] . . . . . . . . . . . . . . . . . . . . . . . . . . [04:05:34] Finalizing VEGAS config... [04:05:34] Checking telescope [04:05:34] Configuration Complete [04:05:34] source : B0329+54 binary : isolated DM : 26.83 P : 0.7145197 S1400 : 203.0 l : 145.0 alias : ---- b : -1.22 jname : J0332+5434 S400 : 1500.0 location : J2000 @ (03:32:59.36, 54:34:43.50) [04:05:34] Slewing to source. [04:05:34] In state Ready, waiting for state Activating [04:05:34] Setting State: Activating [04:05:34] Detected state Activating [04:05:34] In state Activating, waiting for state Ready [04:06:17] Setting State: Ready [04:06:17] Detected state Ready [04:06:17] Balancing IF system. [04:06:18] Balancing IFRack [04:06:18] Setting State: Activating [04:06:18] Setting State: Ready [04:06:20] the sampler values are: [04:06:20] RF_power 1 : 2.749023 [04:06:20] RF_power 2 : 0.03417969 [04:06:20] RF_power 3 : 2.768555 [04:06:20] RF_power 4 : 0.06835938 [04:06:20] RF_power 5 : 0.0390625 [04:06:20] RF_power 6 : 0.02929688 [04:06:20] RF_power 7 : 0.009765625 [04:06:20] RF_power 8 : 0.04882812 [04:06:20] Balancing VEGAS [04:06:20] Setting State: Activating [04:06:20] Setting State: Ready [04:06:20] Setting State: Activating [04:06:20] Setting State: Ready [04:06:22] Setting State: Activating [04:06:23] Setting State: Ready [04:06:23] source : B0329+54 binary : isolated DM : 26.83 P : 0.7145197 S1400 : 203.0 l : 145.0 alias : ---- b : -1.22 jname : J0332+5434 S400 : 1500.0 location : J2000 @ (03:32:59.36, 54:34:43.50) [04:06:23] Track: Subscan 1 of 1 [04:06:24] In state Ready, waiting for state Running [04:06:24] Setting State: Activating [04:06:24] Setting State: Committed [04:06:28] Setting State: Running [04:06:28] Detected state Running [04:06:28] *** Notice: This subscan will be numbered as scan #85 in your data reduction package. [04:06:28] In state Running, waiting for state Ready [04:16:30] Setting State: Stopping [04:16:32] Setting State: Ready [04:16:32] Detected state Ready [04:16:32] Ygor Telescope: WaitForStopping runSuccessful: True [04:16:32] ******** End Scheduling Block [04:16:32] ******** observer = Ryan Lynch, SB name = 4_example_ak_1, project ID = TGBT22A_503 how much log? 4082 id: 264659self.history: self.history.connection: how much converted log? 4291 #######################################################